ASSRA Forum › General › Reloading the Single Shot Rifle › smokless dat for high wall
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic smokless dat for high wall (Read 1861 times)
Booger
Newbie
*
Offline



Posts: 5
Location: Ballwin,Mo.
Joined: Sep 10th, 2012
smokless dat for high wall
Mar 12th, 2016 at 11:13am
Print Post  
Does anyone have load data for a 6mm/303 thanks bud
  
Back to top
 
IP Logged
 
Skalkaho
Oldtimer
*****
Offline



Posts: 860
Location: Montana
Joined: Sep 29th, 2006
Re: smokless dat for high wall
Reply #1 - Mar 12th, 2016 at 1:02pm
Print Post  
I Googled 6mm/303 Btitish load data...here ya go

(You need to Login or Register to view media files and links)
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
Nero
Frequent Elocutionist
*****
Offline



Posts: 1026
Location: NZ
Joined: Jun 1st, 2006
Re: smokless dat for high wall
Reply #2 - Mar 12th, 2016 at 5:03pm
Print Post  
I used to have a High Wall in 6mm/303 but as mine was a blown out improved case I will not give the loads I used to use but include what I based mine on.
Hope this helps and be carefull.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6788 seconds.