ASSRA Forum - Need ID Help BSA Martini 22 and Walther Match 22

ASSRA Forum › General › Single Shot Rifles › Need ID Help BSA Martini 22 and Walther Match 22

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Need ID Help BSA Martini 22 and Walther Match 22 (Read 4175 times)

Ridecontrol Participating Member Offline Posts: 22 Location: Cincy/ Dayton Joined: Jan 13^th, 2007	Need ID Help BSA Martini 22 and Walther Match 22 Feb 21^st, 2016 at 2:22pm	Print Post
	Need help with specific model designation. I acquired two Match rifles (both .22LR) in a larger estate buy. I do not have an interest in these items but need to ID them for divesting. I have quite a few photos of each to share. Email for additional photos. I will try to paste the Photobucket link here but if you have trouble email me for the photos. Ken in Ohio 937 657 4440 garandman@woh.rr.com


	IP Logged

Ridecontrol Participating Member Offline Posts: 22 Location: Cincy/ Dayton Joined: Jan 13^th, 2007	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #1 - Feb 21^st, 2016 at 2:27pm	Print Post
	additional photos.


	IP Logged

Hayface Full Member Offline Posts: 245 Joined: Mar 20^th, 2015	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #2 - Feb 21^st, 2016 at 4:26pm	Print Post
	Your Walther appears to be a KKM.


	IP Logged

Travelor Full Member Offline Posts: 132 Location: Central Arkansas Joined: May 5^th, 2008	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #3 - May 16^th, 2016 at 6:39am	Print Post
	The BSA Martini is a Mk III as evidenced by the longer action and the wood panels forearm screws which attach them to the free floating forearm. The barrel is screwed into the action and is not adjustable. The two large "screws" in the forward part of the receiver are to hold the floating forearm to the receiver. This is a very desirable and accurate model of the BSA Martini line of target rifles.


	IP Logged

bnice Frequent Elocutionist Offline Posts: 1845 Location: Iowa Joined: Nov 30^th, 2006	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #4 - May 16^th, 2016 at 5:00pm	Print Post
	Looks like a mk4 or 5 looking at the trigger guard front, but picture could be better. Trigger guard and a view of the front of the forearm would help


	IP Logged

Kurt_701 Frequent Elocutionist Offline Posts: 1013 Location: Missouri Joined: May 20^th, 2004	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #5 - May 17^th, 2016 at 11:50pm	Print Post
	I agree with bnice . I think it is a MKIV or V, because of the butt stock. the butt plate will go up or down, and there is an insert to adjust length of pull. Kurt

	M-14 3rd Battalion 27th Marines RVN 68'69'
	IP Logged

MartiniBelgian Frequent Elocutionist Offline Posts: 1671 Location: Aarschot Joined: Jun 7^th, 2004	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #6 - May 18^th, 2016 at 1:02pm	Print Post
	Looks like a Mk V to me - the barrel does seem to be papered, unless that is an optical illusion...


	WWW IP Logged

Insert Caddy Participating Member Offline Posts: 28 Joined: Jan 27^th, 2010	Re: Need ID Help BSA Martini 22 and Walther Match 22 Reply #7 - May 18^th, 2016 at 5:41pm	Print Post
	The barrels on the MK I and II are threaded. The barrels on the III, IV and V are not. The barrel shank on the III, IV and V is 1 inch. Replacement barrels are turned to .9995 for slip in fit. Easy headspacing!


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9087 seconds.