ASSRA Forum › General › Rifle Photos › CPA ready to go
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) CPA ready to go (Read 14076 times)
patriot
Participating Member
*
Offline



Posts: 37
Joined: Mar 29th, 2015
Re: CPA ready to go
Reply #15 - Dec 10th, 2015 at 7:04pm
Print Post  
Wow!  Thanks for the photos.

Mark
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7547
Location: Virginia
Joined: Apr 23rd, 2004
Re: CPA ready to go
Reply #16 - Dec 10th, 2015 at 7:14pm
Print Post  
I think it's the rifle on CPA's web site, Scope is a STS just like mine, front sight riser is lower and mine was too at first. Shot it for a while with the lower front, once zeros were established so I could calculate height had Mike Stevens make a higher base to get it up to scope sight height.

I don't know if you guys remember Mike but he was the first to reproduce the Soule Tang sight. One on this gun is a MVA other CPA carries one of Mike Stevens Soules.  Used to switch it back and forth. Now each has it's own.

Never confirmed it's the web site rifle with CPA though.

Boats
  
Back to top
 
IP Logged
 
Crown-C
Senior Forum Member
****
Offline



Posts: 494
Location: St. Marys Kansas
Joined: Apr 6th, 2009
Re: CPA ready to go
Reply #17 - Dec 10th, 2015 at 7:22pm
Print Post  
That is one fine rifle. Great stock finish and checkering too. Anyone would be proud to own that one! 

Richard
  
Richard
Crown-C Ranch in the Flinthills
NRA Life Member
ASSRA Member # 10366
Member & Founders Society, Cody Firearms Museum
Veteran
Back to top
 
IP Logged
 
Travelor
Full Member
***
Offline



Posts: 132
Location: Central Arkansas
Joined: May 5th, 2008
Re: CPA ready to go
Reply #18 - Jun 1st, 2016 at 8:32am
Print Post  
Boats, what barrel weight (number) is your gun?  I am having a similar CPA rifle built and am concerned about the weight for shooting off hand.  I'm in a quandary as to what barrel to put on.  Spoke to Gail and she suggested a Number 2 or 2 1/2 half round/half octagon 26" long.

I have a CPA Silhouette with a Model 52 butt stock and Pope butt plate that has a 28" number 4 full octagon barrel and it is too heavy for me to hold for any length of time - i.e. cant hold long enough for silhouette.
  
Back to top
 
IP Logged
 
GeorgeC
Oldtimer
*****
Offline


ASSRA 11411

Posts: 521
Location: Madison, IN
Joined: Dec 27th, 2012
Re: CPA ready to go
Reply #19 - Jun 1st, 2016 at 3:33pm
Print Post  
Beautiful rifle,boats.  Just had CPA to build me on the Pope style.  .22RF/.25-20 WCF.  After I got them, I decided to have another action/stock for the .25-20 barrel.  My barrels are both #2 1/2 x 28" octagon to round and both balance very nicely offhand.
What height is your front sight and scope bases?  I assume your rear sight is a long range to get the height needed for the Pope cheek piece.
  
Never mind the mule. Just load the wagon.
Back to top
Facebook  
IP Logged
 
Travelor
Full Member
***
Offline



Posts: 132
Location: Central Arkansas
Joined: May 5th, 2008
Re: CPA ready to go
Reply #20 - Jun 2nd, 2016 at 6:11am
Print Post  
GeorgeC, I do not know what height the sights and scope bases will be as I have left this up to Gail at CPA.
  
Back to top
 
IP Logged
 
GeorgeC
Oldtimer
*****
Offline


ASSRA 11411

Posts: 521
Location: Madison, IN
Joined: Dec 27th, 2012
Re: CPA ready to go
Reply #21 - Jun 3rd, 2016 at 1:58pm
Print Post  
GeorgeC wrote on Jun 1st, 2016 at 3:33pm:
Beautiful rifle,boats.  Just had CPA to build me on the Pope style.  .22RF/.25-20 WCF.  After I got them, I decided to have another action/stock for the .25-20 barrel.  My barrels are both #2 1/2 x 28" octagon to round and both balance very nicely offhand.
What height is your front sight and scope bases?  I assume your rear sight is a long range to get the height needed for the Pope cheek piece.


Travelor, actually my questions were addressed to boats.
  
Never mind the mule. Just load the wagon.
Back to top
Facebook  
IP Logged
 
oodmoff
Senior Forum Member
****
Offline



Posts: 276
Location: colorado springs
Joined: Jan 12th, 2009
Re: CPA ready to go
Reply #22 - Jun 3rd, 2016 at 2:35pm
Print Post  
Beautiful rifle indeed!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2306 seconds.