ASSRA Forum › General › Reloading the Single Shot Rifle › Alliant MP-200
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Alliant MP-200 (Read 3652 times)
.22-5-40
Oldtimer
*****
Offline



Posts: 828
Joined: Feb 13th, 2010
Alliant MP-200
Sep 23rd, 2015 at 8:40pm
Print Post  
I have read posts here in past on this powder in .38-55.  Has anyone tried it in the smaller cal.?  I see where it;s recommended for the .22 Hornet jacketed loads..I was thinking of trying it with .22 Hornet cast..If I can find any!  What are your thoughts on this powder compared to the old standbys such as 4227 or 4759?
  
Back to top
 
IP Logged
 
UtahDave
Senior Forum Member
****
Offline



Posts: 396
Location: Heber City, Utah
Joined: Aug 14th, 2010
Re: Alliant MP-200
Reply #1 - Sep 25th, 2015 at 8:57pm
Print Post  
I can't find an MP 200 in the Aliant info.  Did you mean MP 300?  If so there is some info in the blogs on this fine powder.  I only use it in my 32-40...so far.   

Dave
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Alliant MP-200
Reply #2 - Sep 25th, 2015 at 9:29pm
Print Post  
I use 300MP in my 32-40, 28-35 and 25-21 with great success and you can find it in stock at the below link. I started using this powder the day it first hit the open market starting with Lot #1 and I'm currently on my 8th 8pound jug and to date the lots have been very consistant.

(You need to Login or Register to view media files and links)

JLouis
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 828
Joined: Feb 13th, 2010
Re: Alliant MP-200
Reply #3 - Sep 25th, 2015 at 9:38pm
Print Post  
You guys are right!  MP-300.  Thanks.
  
Back to top
 
IP Logged
 
GeorgeC
Oldtimer
*****
Offline


ASSRA 11411

Posts: 521
Location: Madison, IN
Joined: Dec 27th, 2012
Re: Alliant MP-200
Reply #4 - Sep 25th, 2015 at 10:02pm
Print Post  
Alliant MP-300 seems to be a viable powder for my .327 Federal Magnum, 170 gr. cast bullet.  Any suggestions on a min. to max. charge for around 1,500 fps velosity. Looking on Alliant website to get an idea of pressure with some comp. rounds, but didn't find anything.  My rifle is a No.3 action, Douglas HB.
  
Never mind the mule. Just load the wagon.
Back to top
Facebook  
IP Logged
 
Leo1885
Junior Member
**
Offline



Posts: 85
Location: Beaverton, OR
Joined: Sep 30th, 2007
Re: Alliant MP-200
Reply #5 - Sep 26th, 2015 at 11:22am
Print Post  
I tried it my Win. 92 44-40 and it works well with a magnum primer. In my Marlin .357 Mag it works with a regular small pistol primer.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6474 seconds.