Been using the Hoch nose pour mould for my CPA 32-40 with some very good results after some adjustments with alloy and casting techniques . I just received a new Saeco  #732 , 32-40 single cavity mould . First impression a little more beefy than the Hoch mould and the Saeco handles are about 2-3 inches longer . Also the bullet itself is a tapered type with nice deep lube grooves, and when pan lubed filled out nicely . The bases of the Hoch bullets are nice and crisp and sharp, the Saeco bullet base edges are more rounded . Also the Saeco bullet is shorter than the Hoch bullet .Weights are 200.0-200.6 grain variance . I will try later to post some target pics and results after I test fire these new bullets behind 14.2 grs. IMR 4227 powder . Final note, the Saeco bullet will engrave to the base band with only about 1/8 " breech seated forward movement where the Hoch needs at least 1/2" to engrave to the base band . I guess the Saeco bullet is that much shorter .