Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Floral foam....... (Read 1870 times)
singleshotom
Senior Forum Member
****
Offline



Posts: 371
Location: tofield AB. Canada
Joined: Feb 23rd, 2008
Floral foam.......
Aug 24th, 2015 at 11:11am
Print Post  
Many years ago there was a huge hoopla concerning the usage of floral foam.
I at that time sat down an had a great conversation with Mr. Plastic. "Paul" and had a lesson in plastic science which much of was way over my head. Anyway Paul explained that he had tested floral foam an told me when shot out of a gun; it became a " non abrasive inert black ash" was his words....... Since that conversation I switched to an used floral foam ever since.
An recently I came across this scientific experiment which made me think of Paul and his experiment's. Have a look at this ;   
(You need to Login or Register to view media files and links)
Thinking of you Paul....
sst
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Floral foam.......
Reply #1 - Aug 24th, 2015 at 11:55am
Print Post  
Floral Foam:
Unusual Fire and Explosion Hazards:
Finished foam will support combustion if it is ignited by direct contact with an open flame or exposed to temperatures in the range of 600°F.  If foam is placed in a microwave for an extended period, it will begin to burn.
  Combustion
occurs at the center of the brick and due to the insulating effect of the foam, can proceed unnoticed until an appreciable heat buildup occurs
  
Back to top
 
IP Logged
 
singleshotom
Senior Forum Member
****
Offline



Posts: 371
Location: tofield AB. Canada
Joined: Feb 23rd, 2008
Re: Floral foam.......
Reply #2 - Aug 24th, 2015 at 1:26pm
Print Post  
So in the tests you did. Were these results good or bad?
I dint follow your Hypothesis on use of floral for wadding. 
sst
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint