ASSRA Forum - Box for 32-40 Breech Seater

ASSRA Forum › General › Reloading the Single Shot Rifle › Box for 32-40 Breech Seater

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Box for 32-40 Breech Seater (Read 4752 times)

John Boy Ex Member	Box for 32-40 Breech Seater Jul 9^th, 2015 at 4:25pm	Print Post
	(You need to *Login* or *Register* to view media files and links) (You need to *Login* or *Register* to view media files and links) * A trinket box I had * 1/16 adhesive back green felt - DuroFelt * A piece of vinyl siding foam insulation X-Acto knife Engraved plate for box cover * Ball hasp The powder funnel & volumetric measure is for black powder reloads at the range I Kind of Like It


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Box for 32-40 Breech Seater Reply #1 - Jul 9^th, 2015 at 4:55pm	Print Post
	Very Nice John!

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2580 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: Box for 32-40 Breech Seater Reply #2 - Jul 9^th, 2015 at 5:32pm	Print Post
	Nice work. I'd like to do something a little more classy than the cardboard boxes I currently use. Chris.


	IP Logged

slumlord44 Frequent Elocutionist Offline Posts: 2850 Location: Lebanon, Illinois 62254 Joined: Dec 21^st, 2007	Re: Box for 32-40 Breech Seater Reply #3 - Jul 9^th, 2015 at 9:55pm	Print Post
	Great work.


	IP Logged

Pentz Senior Forum Member Offline Funf und Zwanzig mit den Hut Posts: 435 Location: Vancouver, WA Joined: Sep 4^th, 2014	Re: Box for 32-40 Breech Seater Reply #4 - Jul 10^th, 2015 at 1:03am	Print Post
	Simple, tasteful, elegant!

	ASSRA Member Yoostabe # 11497
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17976 Location: Oregon Joined: Feb 2^nd, 2009	Re: Box for 32-40 Breech Seater Reply #5 - Jul 10^th, 2015 at 9:16am	Print Post
	Very elegant! That will class up the firing line!

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

John Boy Ex Member	Re: Box for 32-40 Breech Seater Reply #6 - Jul 10^th, 2015 at 12:41pm	Print Post
	Seater Box - Modification A: How many times have you been at the range and " Where did I put my scope caps?" Not Any More! (You need to *Login* or *Register* to view media files and links)


	IP Logged

Pentz Senior Forum Member Offline Funf und Zwanzig mit den Hut Posts: 435 Location: Vancouver, WA Joined: Sep 4^th, 2014	Re: Box for 32-40 Breech Seater Reply #7 - Jul 10^th, 2015 at 1:21pm	Print Post
	Bauer Cases, who carries the major name hard cases, is down the road here in Vancouver. I stopped by and they will (for a nice fee) custom-cut a Pelican case to my rifle and scope, as well an any accessories. I need to sell a kidney for this but it will be about 8% of the rifle and scope combo.

	ASSRA Member Yoostabe # 11497
	IP Logged

Oldman1950 Senior Forum Member Offline Posts: 266 Location: Virginia Joined: Feb 8^th, 2014	Re: Box for 32-40 Breech Seater Reply #8 - Jul 11^th, 2015 at 11:37am	Print Post
	Here is the case I made for my CPA 2 barrel set. The case is a Pelican. I cut the foam with a thin blade fillet knife. Lay everything out in the case and trace around things with a white small tip marker. Keep the knife verticle while you cut. For items that are thinner than the foam layer that you just cut you can take the piece of foam removed and slice it to the thickness you need and place it back into the cut.


	IP Logged

John Boy Ex Member	Re: Box for 32-40 Breech Seater Reply #9 - Jul 11^th, 2015 at 2:06pm	Print Post
	Oldman: Great job - fine setup. It's a nice way to protect one's investments. I was looking at Bauer's site for a better case. Have 5 CPA barrels mounted with scopes is a double rifle case now - not cut into the foam though Thanks for sharing


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.5189 seconds.