ASSRA Forum › General › Reloading the Single Shot Rifle › Harvey De-primer
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Harvey De-primer (Read 2631 times)
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Harvey De-primer
Jul 8th, 2015 at 5:33pm
Print Post  
Does anyone have any experience with these?
Will they work on a 35-30 Maynard thick rim?

(You need to Login or Register to view media files and links)
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Harvey De-primer
Reply #1 - Jul 8th, 2015 at 9:58pm
Print Post  
bump
  
WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7624
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Harvey De-primer
Reply #2 - Jul 9th, 2015 at 1:49am
Print Post  
From the pictures, it doesn't look like it will work on the 35-30 Maynard thick rim but, it could be made to workby sloting the de-caper wide and deep enough to take the rim.

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
rfd
Full Member
***
Offline



Posts: 146
Joined: Aug 20th, 2014
Re: Harvey De-primer
Reply #3 - Jul 9th, 2015 at 6:46am
Print Post  
i don't know of a centerfire cartridge the harvey won't deprime.  i use it for 45acp through .45-70 and it works just fine.  i've tried other portable deprimers, but the harvey is best for me and i use it at the range to deprime bpc's before they get dunked in the water/soap jug.

if you doubt it'll work on a particular cartridge case, check with harvey ...

(You need to Login or Register to view media files and links)

Specifications:
Weight: 11 ounces

Outside Length: 5 inches
Outside width:  1 inch

Depriming pin diameter: .07"

Constructed from 01 tool steel heat treated to Rockwell 50C

Maximum case length: 3.075 inches 

Maximum case width: .62 inches 

Maximum case rim:    .75 inches
  
NRA Life Member ~ NRA RSO ~ (You need to Login or Register to view media files and links)
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1750 seconds.