ASSRA Forum - Locking mold handles...any preferences?

ASSRA Forum › General › Reloading the Single Shot Rifle › Locking mold handles...any preferences?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

Locking mold handles...any preferences? (Read 9429 times)

SSShooter Frequent Elocutionist Offline Posts: 2942 Location: Southern NJ Joined: Aug 1^st, 2010	Re: Locking mold handles...any preferences? Reply #15 - Jun 16^th, 2015 at 7:48pm	Print Post
	40_Rod wrote on Jun 16^th, 2015 at 8:10am: One more tip for those with arthritic hands. Replace the round handle with a shortened hammer handle it makes it much easier to grip and turn. I can’t take credit for this, I bought a set of Cabin tree handles from Steve Durren and he had added the handle. After one casting session I replaced all my handles with hammer handles. 40 Rod Interesting. Any chance you could post a picture of a couple of your sets of handles? Thanks.

	Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
	GTalk IP Logged

mes Oldtimer Offline Posts: 503 Location: Wisconsin Joined: Apr 17^th, 2004	Re: Locking mold handles...any preferences? Reply #16 - Jun 17^th, 2015 at 7:14am	Print Post
	Quote: One more tip for those with arthritic hands. Replace the round handle with a shortened hammer handle it makes it much easier to grip and turn. I can’t take credit for this, I bought a set of Cabin tree handles from Steve Durren and he had added the handle. After one casting session I replaced all my handles with hammer handles. 40 Rod 40 Rod Not real good at visualization, I need a picture of this thanks

	Martin Stenback
	IP Logged

KAF Ex Member	Re: Locking mold handles...any preferences? Reply #17 - Jun 17^th, 2015 at 7:43am	Print Post
	I do use a hammer handle replacing the round handle on my locking handles. It is placed with the flats horizontal. Makes it way easier to grip.


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 0.8325 seconds.