ASSRA Forum - Article on barrel break-in process posted

ASSRA Forum › General › General Discussion › Article on barrel break-in process posted

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Article on barrel break-in process posted (Read 3135 times)

texasmac Frequent Elocutionist Offline Posts: 2153 Location: Central Texas Joined: Aug 16^th, 2004	Article on barrel break-in process posted May 31^st, 2015 at 2:31pm	Print Post
	Guys, I just posted a new article titled: Barrel Break-In Process. It details Badger Barrels’ process and Lee Shaver abbreviated technique. If you’re interested, click on the following link. (You need to *Login* or *Register* to view media files and links) Wayne

	NRA Life (Benefactor & President's Council) Member, TSRA Life Member, NSSF Member, Author & Publisher of the Browning BPCR book
	IP Logged

Adrian Full Member Offline Posts: 122 Joined: Mar 2^nd, 2015	Re: Article on barrel break-in process posted Reply #1 - May 31^st, 2015 at 4:08pm	Print Post
	I purchased a few years ago a new .223 with a bore so rough that patches would tear to pieces while trying to clean it. I broke it in by firing one shot at a time and cleaning with oiled steel wool. That rifle is now extremely accurate, does not foul with copper, and it needs one wet patch and one dry patch to clean. The shots from a clean dry bore and a fouled bore are within 1/2', always. While cleaning with steel wool at the shooting range, there were many hunters there, as it was just a week or two before hunting season., They saw my scrubbing and thought i was nuts. Half of them could not keep their bullet holes into a 6" circle at 100 yards. One idiot in particular had 3 kinds of ammunition, switched back and forth between them and adjusted his scope after every shot. He he he.
	« Last Edit: May 31^st, 2015 at 4:22pm by Adrian »

	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Article on barrel break-in process posted Reply #2 - May 31^st, 2015 at 6:24pm	Print Post
	A lack of practical experiance does not make an individual an idiot. No one is born with all knowledge it is something one gains going through life. One would assume the gentleman mentioned has not yet gained the knowledge that switching ammo makes a differance. He might have substantial knowledge in an area we are not highly familiar with and we would not like him to consider us idiots for lack of the same would we.

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

Adrian Full Member Offline Posts: 122 Joined: Mar 2^nd, 2015	Re: Article on barrel break-in process posted Reply #3 - May 31^st, 2015 at 8:00pm	Print Post
	JLouis wrote on May 31^st, 2015 at 6:24pm: A lack of practical experiance does not make an individual an idiot. No, but being arrogant, ignorant, and condescending and making snide remarks about others, does.


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Article on barrel break-in process posted Reply #4 - May 31^st, 2015 at 8:42pm	Print Post
	And that I agree with you on if that was what was taking place on that day. We need less of that taking place in this modern day world but one should not lower one's self to their same level. Idiot is a powerful and severly degrading word and it makes one appear to be on a higher level than others. Self rghteous, arrogant or self centered might have been a better choice of words? JLouis

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

Nero Frequent Elocutionist Offline Posts: 1026 Location: NZ Joined: Jun 1^st, 2006	Re: Article on barrel break-in process posted Reply #5 - Jun 28^th, 2015 at 6:46pm	Print Post
	I found this post very interesting and wrapped some steel wool around a cleaning rod and had a go with my new unfired 5.6x50R BSA Martini. I clean with Hoppes number 9 after firing. about three wet patches followed by dry and a final wet patch and put the rifle away for the night. The next day I clean with a dry patch and have always found green copper fouling on the patch. Another wet patch and put away and do this each day for a week by when the patches come out clean. I then oil the barrel with engine oil and put away. After shooting and cleaning my new barrel barrel on Sunday, imagine my surprise when I cleaned it this morning and there was absolutely no green copper fouling on the patch.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.5118 seconds.