ASSRA Forum › General › Reloading the Single Shot Rifle › Paper bullets for Sharps
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Paper bullets for Sharps (Read 3900 times)
Randy1944
Newbie
*
Offline



Posts: 9
Joined: Mar 8th, 2015
Paper bullets for Sharps
Mar 11th, 2015 at 1:45pm
Print Post  
Could someone help me with a source for paper bullets for my .52 caliber Sharps?  When I get it cleaned and checked out by a gunsmith, I would like to shoot it a few times.  It takes the paper bullets.  Also, any particular "caps" to use on the nipple?  Thanks from a newbie.
  
Back to top
 
IP Logged
 
Hi-Wall56
Full Member
***
Offline



Posts: 204
Location: Banks of the Brazos River
Joined: Feb 11th, 2011
Re: Paper bullets for Sharps
Reply #1 - Mar 11th, 2015 at 2:55pm
Print Post  
Check Shiloh Sharps, I think they sell loading supplies for the paper cartridge Sharps.
  
Back to top
 
IP Logged
 
George Babits
Frequent Elocutionist
*****
Offline



Posts: 1144
Joined: Sep 27th, 2012
Re: Paper bullets for Sharps
Reply #2 - Mar 11th, 2015 at 3:15pm
Print Post  
Last time I looked Shiloh didn't sell the papers for making paper cartridges anymore.  I think Buffalo Arms has the papers, but to my mind they are outrageously expensive.  One brans of "stump remover" is 99% KNO3 which is what you nitrate the paper with.  Take a look at the Shiloh Forum as there is a board for the 1863 Sharps which has a LOT of information.  I also have an original and am working up to shooting it this spring.  For a bullet I will be using the Lyman 54 caliber "minie" bullet.  Used that very successfully when I had a paper cartridge Shiloh military rifle.   Use standard musket caps for ignition.

Good Lock,
George
Salmon, Idaho
  
Back to top
 
IP Logged
 
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: Paper bullets for Sharps
Reply #3 - Mar 11th, 2015 at 11:50pm
Print Post  
Have you checked with Dixie Gun Works?

  
There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
.22-5-40
Oldtimer
*****
Offline



Posts: 826
Joined: Feb 13th, 2010
Re: Paper bullets for Sharps
Reply #4 - Mar 12th, 2015 at 12:41am
Print Post  
I have a .45 Shilo 1863 percussion.  I have always made my own ctgs. using pottasium nitrate (saltpeter) soaked thin paper.  However, you don't need the paper ctgs. to shoot a percusssion Sharps..simply drop bullet into breech & using short rod or dowel..seat it firmly aginst lands & pour in measured charge. 
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2578
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Paper bullets for Sharps
Reply #5 - Mar 12th, 2015 at 8:09pm
Print Post  
You might want to check with Buffalo Arms.  I think that they sell nitrated paper, and likely some of the other stuff you need.

Chris.
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Paper bullets for Sharps
Reply #6 - Mar 13th, 2015 at 9:54am
Print Post  
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Rich_Siegel
Full Member
***
Offline



Posts: 177
Location: Maine
Joined: Feb 6th, 2006
Re: Paper bullets for Sharps
Reply #7 - Mar 15th, 2015 at 9:04am
Print Post  
For years I made my own nitrated paper for my 54 cal. Shiloh.  Then, I tried just using plain copy paper for the cartridges and they worked as well as the nitrate paper.  My advise is just to make the cartridges out of any plain paper and then use a very thin paper (cigarette or women's hair curler paper) to glue on the end of the cartridge after the powder has been added.

No special glue is needed, just plain liquid white school glue like Elmers.  Use the glue to first join the sides of the cartridge tube together.  Then glue the tube to the ringtail or base of the bullet.  Pour powder in and glue on the end cap.

As far as a percussion cap goes, use standard musket caps, sometimes called top hat caps.

My standard load for a 54 caliber Sharps carbine is 50 grains of GOEX ffg powder behind a 490 grain lead ringtail bullet.

Rich
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5837 seconds.