ASSRA Forum › General › General Discussion › Tang Sights
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Tang Sights (Read 1879 times)
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2942
Location: Southern NJ
Joined: Aug 1st, 2010
Tang Sights
Feb 16th, 2015 at 1:23pm
Print Post  
Have a Lyman (103?) and Marbles tang sight. Am wondering if they would be good for CLA silhouette shooting? Thanks.
  
Glenn - Stevens 044 1/2, Bartlein SS 5R barrel in 22LR
Back to top
GTalk  
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4431
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Tang Sights
Reply #1 - Feb 16th, 2015 at 2:32pm
Print Post  
With one exception all my cowboy silhouette rifles, both lever and single shot, have modern Marble tang sights. Windage adjustment is a must in my book and I prefer the click to set elevation adjustments over the lock with turning lock ring kind for ease of setting and repeatability. The exception is a Lyman 103 on a Stevens RF.
  
Back to top
 
IP Logged
 
Jubilado
Full Member
***
Offline



Posts: 123
Location: Nebraska
Joined: Nov 14th, 2005
Re: Tang Sights
Reply #2 - Feb 16th, 2015 at 6:40pm
Print Post  
My short answer to the original question is "yes", depending on how good you want the tang sight to be.

They will work, and I agree with oneatatime.

I've tried that type of tang sight for lever silhouette, and they don't provide the precision and ease of use that  I want.  I use Redfield 75s on two of my rifles, and a short staff Hoke on another.  The Hoke is really nice, but possibly overkill for the purpose. The vernier scale is very nice and positive to use.

I also made a special digital depth gauge for my Redfields.   It's nice to be able to verify the exact setting.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3616 seconds.