ASSRA Forum - My new to me Remington Rolling Block question

ASSRA Forum › General › General Discussion › My new to me Remington Rolling Block question

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

My new to me Remington Rolling Block question (Read 2803 times)

butch lambert Full Member Offline Posts: 228 Location: Poetry, Texas Joined: Jun 21^st, 2006	My new to me Remington Rolling Block question Feb 14^th, 2015 at 2:34pm	Print Post
	It sure looks like it has vee threads instead of square threads for the barrel tenon. Is this possible?


	WWW IP Logged

buchsenmacher Full Member Offline Posts: 209 Location: Adrian, MI Joined: Apr 18^th, 2004	Re: My new to me Remington Rolling Block question Reply #1 - Feb 14^th, 2015 at 3:25pm	Print Post
	Butch, Every Remington or Remington licensed rolling block I've seen has had square threads. The Whitney's also had square threads. The Pedersoli actions have "V" threads. It could possibly be one of the Belgian knock offs. Steven Durren

	Steven Durren Professional member, ACGG
	IP Logged

butch lambert Full Member Offline Posts: 228 Location: Poetry, Texas Joined: Jun 21^st, 2006	Re: My new to me Remington Rolling Block question Reply #2 - Feb 14^th, 2015 at 5:15pm	Print Post
	Steven, I have an Enfield and a Springfield and they definitely have square threads. This receiver has Remington and the patent dates on the top of the rear tang. That is the only markings on the receiver.


	WWW IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 712 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: My new to me Remington Rolling Block question Reply #3 - Feb 14^th, 2015 at 6:15pm	Print Post
	DeHaas shows V threads in the No-4 solid frame action on page 329 of Single Shot Rifles and Actions. Only Remington with them he shows. Hope this helps.


	IP Logged

buchsenmacher Full Member Offline Posts: 209 Location: Adrian, MI Joined: Apr 18^th, 2004	Re: My new to me Remington Rolling Block question Reply #4 - Feb 14^th, 2015 at 6:37pm	Print Post
	Butch, It's a new one on me. I have been known to be wrong before. What size are the threads? Steven Durren

	Steven Durren Professional member, ACGG
	IP Logged

butch lambert Full Member Offline Posts: 228 Location: Poetry, Texas Joined: Jun 21^st, 2006	Re: My new to me Remington Rolling Block question Reply #5 - Feb 23^rd, 2015 at 8:35pm	Print Post
	Sorry, It is 1.055 12TPI square threads.


	WWW IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12284 Location: Why, out West of course Joined: May 29^th, 2006	Re: My new to me Remington Rolling Block question Reply #6 - Feb 23^rd, 2015 at 8:41pm	Print Post
	I worked on a very early large frame roller that had V threads. Anything is possible. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

drinks Ex Member	Re: My new to me Remington Rolling Block question Reply #7 - Feb 24^th, 2015 at 5:22pm	Print Post
	My #4 has "V" threads, my 1867 Dane does not have any threads.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.6586 seconds.