ASSRA Forum - BRC Barrel, Breech Seating, Etc.

ASSRA Forum › General › Reloading the Single Shot Rifle › BRC Barrel, Breech Seating, Etc.

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

BRC Barrel, Breech Seating, Etc. (Read 11185 times)

Hi-Wall56 Full Member Offline Posts: 204 Location: Banks of the Brazos River Joined: Feb 11^th, 2011	Re: BRC Barrel, Breech Seating, Etc. Reply #15 - Feb 17^th, 2015 at 8:59pm	Print Post
	I'm with LD1, lets see the 10 shot group.


	IP Logged

JS47 Frequent Elocutionist Offline Posts: 1265 Location: Arizona Joined: Oct 12^th, 2012	Re: BRC Barrel, Breech Seating, Etc. Reply #16 - Feb 17^th, 2015 at 9:17pm	Print Post
	This sounds like an alibi but, my computor died and I'm using an ancient Compaq my daughter left here many years ago. As a result I don't know if I can post a picture but I'll work on it. I can tell you that it was about as wide as the 5 shot groups but had some vertical in it that enlarged it to .759". I also found another 5 shot group I'd saved that was under 1/2". I'm beginning to think that Al may have sent me a pretty good barrel! JS


	IP Logged

Hi-Wall56 Full Member Offline Posts: 204 Location: Banks of the Brazos River Joined: Feb 11^th, 2011	Re: BRC Barrel, Breech Seating, Etc. Reply #17 - Feb 17^th, 2015 at 9:30pm	Print Post
	JS Not to worry, from your 5 shot groups we pretty much know what the 10 shot will look like, just curious. Yes, it does look like Al sent you a darn good barrel. If you can get it working we'd like to see the 10 shot, but if not we each need to get our own BRC barrel and shoot some groups. Kirk


	IP Logged

JS47 Frequent Elocutionist Offline Posts: 1265 Location: Arizona Joined: Oct 12^th, 2012	Re: BRC Barrel, Breech Seating, Etc. Reply #18 - Feb 17^th, 2015 at 10:36pm	Print Post
	It took awhile but I figured it out. Here's the picture I sent Al. JS


	IP Logged

Hi-Wall56 Full Member Offline Posts: 204 Location: Banks of the Brazos River Joined: Feb 11^th, 2011	Re: BRC Barrel, Breech Seating, Etc. Reply #19 - Feb 17^th, 2015 at 10:52pm	Print Post
	John, That is truly fine shooting, Al should be proud of his barrel and you should be proud of your shootin. Well done. Kirk


	IP Logged

Longdistance1 Senior Forum Member Offline Posts: 468 Location: Amidon, ND Joined: Feb 11^th, 2013	Re: BRC Barrel, Breech Seating, Etc. Reply #20 - Feb 18^th, 2015 at 12:36am	Print Post
	Hello John Thanks for posting the target! You just proved three things. 1 you have not lost your shooting ability! 2 Borchardt Rifle Co makes a fine barrel! 3 and heaven forbid you can make W-W shoot!!! W-W is all I ever shoot unless it's it's a round ball gun. Later Lomgdistance1


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 1.0337 seconds.