ASSRA Forum - Question I need to cast a larger bullet

ASSRA Forum › General › General Discussion › Question I need to cast a larger bullet

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Question I need to cast a larger bullet (Read 1819 times)

cat1870 Junior Member Offline Posts: 92 Location: utah Joined: Aug 7^th, 2007	Question I need to cast a larger bullet Jan 10^th, 2015 at 1:33pm	Print Post
	Hello All: My rifle barrel has a groove Dia. of .459. I'm casting with wheel weights with a ladle plus 2% tin added. Casting temp is 750. My bullets are dropping from the mold at .4575. How can I get the bullets up to .459 or .460? Thanks, Gary

	SASS Life member & NRA Life member
	IP Logged

drinks Ex Member	Re: Question I need to cast a larger bullet Reply #1 - Jan 10^th, 2015 at 2:15pm	Print Post
	A couple layers of fiberglass tape on the mating faces of the mold may do it. I have a lathe so I just make a reamer and enlarge the driving bands so as to get a bullet large enough.


	IP Logged

bnice Frequent Elocutionist Offline Posts: 1999 Location: Iowa Joined: Nov 30^th, 2006	Re: Question I need to cast a larger bullet Reply #2 - Jan 10^th, 2015 at 2:59pm	Print Post
	Try looking up the process to lap a mould using a bullet cast from it. It is called beagle. Cast bullet assoc. Forum would be a place to look.


	IP Logged

cheatin_charlie Senior Forum Member Offline Posts: 437 Location: ohio Joined: Jan 10^th, 2009	Re: Question I need to cast a larger bullet Reply #3 - Jan 10^th, 2015 at 3:12pm	Print Post
	Hear is the info you want (You need to *Login* or *Register* to view media files and links)


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.2679 seconds.