I load 45-120 and 40-90 SS but a standard Rockchucker is difficult in that the loose bullet on the case needs to be put in at an angle up into the die then slid into the shell holder. I am looking for a reasonably priced option.

THank you,
Charles

One added piece of information:
The longest seating die I have is for 40-82 which only can be turned into the press ONE thread before it crimps the case mouth. And, I am to cheap to buy 40-90 SS dies since I don't load it enough to justify.

I have a Lee Classic, large cast iron turret press. They are very heavy duty and have 4 1/4 inches above the shell holder to the bottom of the turret.

Press Type: Turret Press 
Frame Material: Steel and Cast Iron
Frame Opening Size: 4-1/2" 
Handle Location: Bottom Right or Left 
Die Size Accepted: 7/8"-14 Threaded Dies 
Die Bushing Accepted: No 
Die Bushing Brand Used: N/A 
Spent Primer Collection System: 
Ram Stroke: 3-1/2" 
Ram Diameter: 1-1/8" 

I bought mine about 10 years ago for about $100, I think they are in the ~$150 range now.

Frank

My go to press is a corbin TypeII press. It has plenty of length and all the power you will ever need for case forming.

40 Rod