ASSRA Forum › General › Reloading the Single Shot Rifle › FYI - CH4D 25-21 Seating Die
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic FYI - CH4D 25-21 Seating Die (Read 1334 times)
John Boy
Ex Member


FYI - CH4D 25-21 Seating Die
Nov 17th, 2014 at 4:45pm
Print Post  
If you order the CH4D die set for the 25-21 ... tell them on the 0.5x9/16 Cone Seat Stem for the seating die that you want a 1/4" cone extension below the threads.  Otherwise, you will not be able to seat 85 or 100gr bullets with no compression.

Mr Davidson replaced my stem for free
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2719 seconds.