ASSRA Forum - ASSRA Target Dimensions?

ASSRA Forum › General › General Discussion › ASSRA Target Dimensions?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

ASSRA Target Dimensions? (Read 1533 times)

spclark Ex Member	ASSRA Target Dimensions? Nov 4^th, 2014 at 8:40am	Print Post
	Another member has asked if I can help prepare a target overlay transparency of the 50' ASSRA target, preferably rings only. I can - easily - but I need a chart or table with the dimensions of the scoring rings down to the closest 0.001" if possible, or whatever units the data is available in. Scans or bitmap (JPEG) images aren't what I'm referring to here either. I could measure an existing printed target but that's kinda innacurate for what the desired outcome is to be. Anyone who has info can PM me here or e-mail me at: hipowershooter_at_gmail_dot_com - but remember you have to swap out the _~_ bits for the proper characters or it won't work!!


	IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: ASSRA Target Dimensions? Reply #1 - Nov 4^th, 2014 at 6:34pm	Print Post
	Could you explain a bit further why measuring an existing target gives you inaccuracies and hinders what you are wanting to produce? Since you are able to measure an existing target, you should be able to obtain the distance between rings readily, outside edge to outside edge, or ... The "lineweight" of the rings themselves would be determined by what you decide to input into your drawing program, and you should be able to apply a "fill" to the center circle, or not, as you wish. Units can be converted to whatever measurement system(s) you are most comfortable working with.

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1676 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: ASSRA Target Dimensions? Reply #2 - Nov 4^th, 2014 at 9:05pm	Print Post
	If you can't measure a target to .001" I don't know what good a more precise overlay is going to do you.

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." "We are holding our own." Ernest McSorley Nov. 10, 1975
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.2483 seconds.