ASSRA Forum - Winchester 1885 32/20 Low Wall

ASSRA Forum › General › Collecting Single Shot Rifles › Winchester 1885 32/20 Low Wall

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

Winchester 1885 32/20 Low Wall (Read 8314 times)

Aussie_Hunter Full Member Offline Posts: 193 Location: Hervey Bay,Queensland Joined: Jul 7^th, 2008	Winchester 1885 32/20 Low Wall Oct 9^th, 2014 at 3:56am	Print Post
	Just collected another nice example with a "heavy "octagonal barrel. There are a number of stamps on the barrel, starting from the breach an oblong with what seems to be a W with a vertical line through it, then on the right hand side 32WCF. Under the woodwork are the markings X2 W.C.F.then VP in an oblong then P in a circle. In front of the woodwork is what appears to be 1 on the bottom of the barrel.It has the normal Winchester stamps on the top strap and serial no. under(116283). The rear sight is the one with a screw holding the fine sight element in and the front sight has the crossbar in its own dovetail with the blade as a separate piece. The foreend has a schnarbel horn inlay. Attaching photos (hopefully), any info greatly appreciated. David A.ps. cant get photos to post will try again tomorrow.D
	« Last Edit: Oct 9^th, 2014 at 7:13pm by Aussie_Hunter »

	IP Logged

Old-Win Frequent Elocutionist Offline Posts: 1692 Location: Minnesota Joined: Nov 24^th, 2005	Re: Winchester 1885 32/20 Low Wall Reply #1 - Oct 9^th, 2014 at 11:07am	Print Post
	It looks like you have found a late model low wall in 32WCF and also known as the 32-20. The VP stands for viewed and proofed and the p in the circle is another proof mark. The number 1 is the weight of the barrel which is the lightest barrel Winchester made. If there is an A at the tip of the lower tang; that indicates it is a coil spring action. If no A, then a it's a leaf spring action. I suspect yours is a coil spring by the serial number but I have seen leaf spring models mixed in that serial number range. Sights sound pretty standard. It should be a pretty handy little rifle. Bob


	IP Logged

Aussie_Hunter Full Member Offline Posts: 193 Location: Hervey Bay,Queensland Joined: Jul 7^th, 2008	Re: Winchester 1885 32/20 Low Wall Reply #2 - Oct 9^th, 2014 at 6:58pm	Print Post
	Bob, thank you for your info, yes it is a coil spring and a pleasure to shoot. Thanks again David A.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16289 Location: Oregon Joined: Feb 2^nd, 2009	Re: Winchester 1885 32/20 Low Wall Reply #3 - Oct 10^th, 2014 at 11:45am	Print Post
	A #1 weight barrel would be pretty standard for a .32-20, and not really considered a "heavy" barrel. Anything larger, like a #2, #3, etc. would be a heavy barrel for one in .32-20 caliber.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: Winchester 1885 32/20 Low Wall Reply #4 - Oct 10^th, 2014 at 8:29pm	Print Post
	From the looks of the photo5 picture, I think the front sight was installed 180 out from standard.

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

Aussie_Hunter Full Member Offline Posts: 193 Location: Hervey Bay,Queensland Joined: Jul 7^th, 2008	Re: Winchester 1885 32/20 Low Wall Reply #5 - Oct 15^th, 2014 at 7:49pm	Print Post
	BP, what do you mean by 180 out of standard ?? thanks David A. (Aussie Hunter)


	IP Logged

DWT1885 Senior Forum Member Offline Posts: 402 Location: New Jersey Joined: Nov 25^th, 2010	Re: Winchester 1885 32/20 Low Wall Reply #6 - Oct 15^th, 2014 at 10:29pm	Print Post
	I think what he means is that the sight was put in backwards. Dale.

	35th Security Police Squadron, Phan Rang AB, RVN, May 70-71. All gave some, some gave all.
	IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: Winchester 1885 32/20 Low Wall Reply #7 - Oct 18^th, 2014 at 9:30pm	Print Post
	Yep. Thats another way of sayin' it.

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11521 Location: Why, out West of course Joined: May 29^th, 2006	Re: Winchester 1885 32/20 Low Wall Reply #8 - Oct 21^st, 2014 at 6:52am	Print Post
	Looks correct to me. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16289 Location: Oregon Joined: Feb 2^nd, 2009	Re: Winchester 1885 32/20 Low Wall Reply #9 - Oct 21^st, 2014 at 11:26am	Print Post
	westerner wrote on Oct 21^st, 2014 at 6:52am: Looks correct to me. Joe. High part of the front sight should be towards the rear.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Ciao998 Senior Forum Member Offline Posts: 263 Location: Kennewick, WA Joined: Oct 23^rd, 2013	Re: Winchester 1885 32/20 Low Wall Reply #10 - Oct 22^nd, 2014 at 7:04am	Print Post
	Nm. Lol


	IP Logged

firearmdoc Full Member Offline Posts: 198 Joined: May 19^th, 2013	Re: Winchester 1885 32/20 Low Wall Reply #11 - Oct 22^nd, 2014 at 8:34pm	Print Post
	The P in the circle would indicate that it was a mail order barrel and was fitted outside of the factory. Jesse


	IP Logged

Aussie_Hunter Full Member Offline Posts: 193 Location: Hervey Bay,Queensland Joined: Jul 7^th, 2008	Re: Winchester 1885 32/20 Low Wall Reply #12 - Oct 24^th, 2014 at 8:23pm	Print Post
	Thank you all for your information, will get the front sight switched around so it is in its proper position, David A.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.7637 seconds.