ASSRA Forum › General › Reloading the Single Shot Rifle › 32-20, 32-40 brass?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic 32-20, 32-40 brass? (Read 4352 times)
SteveS
Participating Member
*
Offline



Posts: 20
Joined: Jul 30th, 2014
32-20, 32-40 brass?
Sep 13th, 2014 at 2:45pm
Print Post  
I'm contemplating the purchase of either above. However, I've searched all over and can't find brass anywhere; I'd be reluctant to purchase if I can't shoot the darn thing. I've read where the 32-40 can be reformed from 30-30. The 32-20, a little more difficult. Any thoughts or available sources.
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2576
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: 32-20, 32-40 brass?
Reply #1 - Sep 13th, 2014 at 9:10pm
Print Post  
Whenever I find .32-40 brass I buy it.  I usually only see it up here once every couple of years or so.  I've also formed some from Winchester brand .38-55 brass and it works quite well.

Edit:  the word formed is. Bit misleading and makes it sound complicated Smiley.   I just run them through a .32-40 FL sizer.  If you go slowly you don't even need to anneal them.

Chris.
  
Back to top
 
IP Logged
 
pdshooter
Ex Member


Re: 32-20, 32-40 brass?
Reply #2 - Sep 13th, 2014 at 9:52pm
Print Post  
CPA did have some starline 32-20 brass at reasonable prices.
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4225
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: 32-20, 32-40 brass?
Reply #3 - Sep 13th, 2014 at 9:58pm
Print Post  
Both .32-20 and .32-40 brass in North Edmonton Wholesale Sports store.

American Homeland Security does not allow us to ship it to the US though.
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7723
Location: Virginia
Joined: Apr 23rd, 2004
Re: 32-20, 32-40 brass?
Reply #4 - Sep 14th, 2014 at 6:00am
Print Post  
Trick is order 500 from Starline, they take your credit card info back order and wait until they make a run. When they ship they charge your card.  500 too many sell half off on this forum.

I am shooting a lot of 500 WW 38/55 I bought in 1993. Once you get the brass, it's a lifetime supply

Boats
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7723
Location: Virginia
Joined: Apr 23rd, 2004
Re: 32-20, 32-40 brass?
Reply #5 - Sep 15th, 2014 at 8:26am
Print Post  
Agree in fact I sized 200 of that lot of 500 38s to 32/40.  Get a supply of brass it's lifetime

Boats

  
Back to top
 
IP Logged
 
DWT1885
Senior Forum Member
****
Offline



Posts: 466
Location: New Jersey
Joined: Nov 25th, 2010
Re: 32-20, 32-40 brass?
Reply #6 - Sep 15th, 2014 at 12:03pm
Print Post  
SteveS, For your info, Starline has 38-55 brass in stock as I ordered some this morning. Dale.
  
35th Security Police Squadron, Phan Rang AB, RVN, May 70-71.
All gave some, some gave all.
Back to top
 
IP Logged
 
RBKenn
Senior Forum Member
****
Offline



Posts: 315
Location: fallon
Joined: Apr 8th, 2011
Re: 32-20, 32-40 brass?
Reply #7 - Sep 16th, 2014 at 9:21pm
Print Post  
I have new .32-20 Starline brass available for any forum member who needs it.
Kenn info@rollingblockparts.com
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4161 seconds.