ASSRA Forum - breach seating tool

ASSRA Forum › General › Reloading the Single Shot Rifle › breach seating tool

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

breach seating tool (Read 2308 times)

argie1891 Senior Forum Member Offline Posts: 268 Location: selah, washington Joined: Jul 8^th, 2010	breach seating tool Sep 7^th, 2014 at 4:15pm	Print Post
	will the same tool work for breach seating both the high wall and the low wall Winchester rifle?

	if you think you have it figured out then you just dont understand
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12269 Location: Why, out West of course Joined: May 29^th, 2006	Re: breach seating tool Reply #1 - Sep 7^th, 2014 at 4:38pm	Print Post
	Which tool? Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

argie1891 Senior Forum Member Offline Posts: 268 Location: selah, washington Joined: Jul 8^th, 2010	Re: breach seating tool Reply #2 - Sep 7^th, 2014 at 8:44pm	Print Post
	that is exactly what I was asking I have no idea which tool to use for a high wall or a low wall. I don't think I have ever seen one. with my cpa I just use a plugged case but I have been told that a breach seating tool is needed for the Winchester model 1885

	if you think you have it figured out then you just dont understand
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 12269 Location: Why, out West of course Joined: May 29^th, 2006	Re: breach seating tool Reply #3 - Sep 7^th, 2014 at 9:28pm	Print Post
	A plugged case will work in a Winchester just like a Stevens or a CPA. The Winchester doesn't have the same amount of camming a Stevens has. Or you can buy a Weber seater or make one like the one in bpJacks thread. (You need to *Login* or *Register* to view media files and links) Joe.
	« Last Edit: Sep 7^th, 2014 at 10:16pm by westerner »
	A blind squirrel runs into a tree every once in a while.
	IP Logged

argie1891 Senior Forum Member Offline Posts: 268 Location: selah, washington Joined: Jul 8^th, 2010	Re: breach seating tool Reply #4 - Sep 8^th, 2014 at 9:51pm	Print Post
	thanks for the information

	if you think you have it figured out then you just dont understand
	IP Logged

Nailman Full Member Offline Posts: 167 Location: Oswego Joined: Apr 17^th, 2004	Re: breach seating tool Reply #5 - Sep 8^th, 2014 at 11:33pm	Print Post
	Ken Meyer also known as Quarter_Bore is my choice for making one. e-mail is h_m_pope@yahoo.com He will make one for you..... Nailman


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.2225 seconds.