ASSRA Forum › General › Reloading the Single Shot Rifle › breech seating depth
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic breech seating depth (Read 2007 times)
SteveS
Participating Member
*
Offline



Posts: 20
Joined: Jul 30th, 2014
breech seating depth
Aug 5th, 2014 at 9:52am
Print Post  
Being new to this, I came across a previous post that had a illustration on a method on how to determine the above.

(You need to Login or Register to view media files and links)

I went thru this exercise on my Pedersoli RB in 45-70 using a 300 grain bullet. The space between the cartridge mouth and the bullet base will be close to 1/4". Anybody see any issues with that large a space?
  
Back to top
 
IP Logged
 
Seanmp
Senior Forum Member
****
Offline



Posts: 294
Location: Land O Lakes
Joined: May 19th, 2014
Re: breech seating depth
Reply #1 - Aug 5th, 2014 at 10:03am
Print Post  
No I've run up to 1/2" between the charge column and the bullet base.

Check your link. When I click on it I get an error
  
Sean
Back to top
 
IP Logged
 
SteveS
Participating Member
*
Offline



Posts: 20
Joined: Jul 30th, 2014
Re: breech seating depth
Reply #2 - Aug 5th, 2014 at 3:54pm
Print Post  
try this

(You need to Login or Register to view media files and links)

copy and paste left off the n in the /cgi-bin
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9593 seconds.