ASSRA Forum - Pope De-Re Capper

ASSRA Forum › General › Collecting Single Shot Rifles › Pope De-Re Capper

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Very Hot Topic (More than 25 Replies)

Pope De-Re Capper (Read 15071 times)

LINOWW Junior Member Offline Posts: 82 Location: washington state, dry side Joined: Oct 10^th, 2007	Pope De-Re Capper Jul 24^th, 2014 at 5:55pm	Print Post
	I have what i believe is an original one on the way(unk caliber).The bottom of the handes are not seen but they are not like a Pool or Meecham with scrapers,they are just rounded. I don’t intend to keep it as I have no Pope rifles and the Meacham’s I have work for me. A friend has shown some interest. Here is the grainy picture of it.I will post a better picture when it arrives. Rough value? I will offer it up here should my buddy decide he doesn’t want it.
	« Last Edit: Jul 24^th, 2014 at 6:07pm by LINOWW »
	G A DAMRON V
	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 695 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Pope De-Re Capper Reply #1 - Jul 24^th, 2014 at 5:57pm	Print Post
	Picture did not make it. Can you post it again?


	IP Logged

LINOWW Junior Member Offline Posts: 82 Location: washington state, dry side Joined: Oct 10^th, 2007	Re: Pope De-Re Capper Reply #2 - Jul 24^th, 2014 at 6:07pm	Print Post
	try this(see above)

	G A DAMRON V
	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 695 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Pope De-Re Capper Reply #3 - Jul 24^th, 2014 at 10:22pm	Print Post
	Pope or Stevens Pope In the Day auction two went in the 250-300 range which I thought a bit cheap. The plating on yours is worse than those were.


	IP Logged

LINOWW Junior Member Offline Posts: 82 Location: washington state, dry side Joined: Oct 10^th, 2007	Re: Pope De-Re Capper Reply #4 - Jul 24^th, 2014 at 11:10pm	Print Post
	Tom_Trevor assra life no.71 wrote on Jul 24^th, 2014 at 10:22pm: Pope or Stevens Pope In the Day auction two went in the 250-300 range which I thought a bit cheap. The plating on yours is worse than those were. Not far off the value I thought.when it arrives I will post good pictures.

	G A DAMRON V
	IP Logged

harry_eales Ex Member	Re: Pope De-Re Capper Reply #5 - Jul 25^th, 2014 at 8:41am	Print Post
	Over the years there have been a good many copies of Harry Pope's De-Re Capper made by various gunsmiths and tool makers, are you certain that it is a genuine Pope made item? Just asking as it would make a deal of difference in the price. Harry


	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 695 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Pope De-Re Capper Reply #6 - Jul 25^th, 2014 at 12:17pm	Print Post
	I am damn sure old man would you like me to post a few pictures of mine for you?? Then take a look in the section on tools in the new Pope books that have just come out. You have them dont you?


	IP Logged

harry_eales Ex Member	Re: Pope De-Re Capper Reply #7 - Jul 25^th, 2014 at 2:16pm	Print Post
	Tom_Trevor assra life no.71 wrote on Jul 25^th, 2014 at 12:17pm: I am damn sure old man would you like me to post a few pictures of mine for you?? Then take a look in the section on tools in the new Pope books that have just come out. You have them dont you? I'm not certain as to whom you are referring Tom_Trevor, but if it is me, then yes I am an old man at 71years of age. I don't have either books on Pope as over here in the UK they cost 50% more than they do in the USA. A pension here doesn't permit the purchase of such items without several months of saving and I currently have other financial priorities. My question as to the origin of the item pictured was directed at LINOWW. Harry


	IP Logged

LINOWW Junior Member Offline Posts: 82 Location: washington state, dry side Joined: Oct 10^th, 2007	Re: Pope De-Re Capper Reply #8 - Jul 25^th, 2014 at 4:56pm	Print Post
	Quote: Over the years there have been a good many copies of Harry Pope's De-Re Capper made by various gunsmiths and tool makers, are you certain that it is a genuine Pope made item? Just asking as it would make a deal of difference in the price. Harry like I said not sure. The picture is just the one I had in the group of items I bought. It was not clean to Be a pope but then again the majority of the stuff had no description. I should have it in my hands Monday at that time I'll take some better pictures maybe you guys can help me out.

	G A DAMRON V
	IP Logged

John Boy Ex Member	Re: Pope De-Re Capper Reply #9 - Jul 25^th, 2014 at 6:06pm	Print Post
	Quote: I have what i believe is an original one on the way(unk caliber). When you receive it - measure the ID of the rim ... then you'll know the caliber


	IP Logged

LINOWW Junior Member Offline Posts: 82 Location: washington state, dry side Joined: Oct 10^th, 2007	Re: Pope De-Re Capper Reply #10 - Jul 25^th, 2014 at 6:31pm	Print Post
	If its a Pope I believe the caliber should be marked on the decapping rod.if it's not would that make it not original though? it wil all be clear monday i hope when it arrives.
	« Last Edit: Jul 25^th, 2014 at 7:28pm by LINOWW »
	G A DAMRON V
	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 695 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Pope De-Re Capper Reply #11 - Jul 25^th, 2014 at 9:49pm	Print Post
	Linoww, If it looks like one of these you are good to go. I have seen some with no calibre marking. Post a picture when it gets here.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16289 Location: Oregon Joined: Feb 2^nd, 2009	Re: Pope De-Re Capper Reply #12 - Jul 26^th, 2014 at 9:14am	Print Post
	I have one that's a very decent copy, and the seller was up front about it being a copy. Whoever built it did a nice job, just too new looking to have the old patina of a real Pope. It also has an updated decapper from the Pope design. I gave a whopping $20 for it, and use it often.
	« Last Edit: Jul 27^th, 2014 at 1:05pm by marlinguy »
	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Tom_Trevor assra life no.71 Oldtimer Offline Tom Trevor Posts: 695 Location: Granada Hills Ca. Joined: Jun 16^th, 2004	Re: Pope De-Re Capper Reply #13 - Jul 26^th, 2014 at 1:13pm	Print Post
	Marlinguy, Please add a picture of your re-de capper for us.


	IP Logged

LONG RANGE Senior Forum Member Offline Posts: 414 Location: CHERRY VALLEY, CA Joined: Oct 3^rd, 2013	Re: Pope De-Re Capper Reply #14 - Jul 26^th, 2014 at 7:04pm	Print Post
	After much begging and pleading I talked a coworker into selling me his Pool capper-decapper. It cost me $100 and two antique telephones. About two weeks later I was walking through the big Pomona gun show when I saw one on a table. I asked the man, how much and he said, it's not mine but I think he wants $15 for it. Of course I threw my elbow out of joint in a speedy effort to get my wallet out. Charles Pool's nephew was kind enough to make me some extra shell holders.


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.9087 seconds.