ASSRA Forum - .32 Miller Long

ASSRA Forum › General › Reloading the Single Shot Rifle › .32 Miller Long

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

.32 Miller Long (Read 5314 times)

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	.32 Miller Long Jul 18^th, 2014 at 7:10pm	Print Post
	Hi, I'm interested in any information regarding the .32 Miller such as a drawing(dimensions), forming cases etc. Thanks in advance, Bob
	« Last Edit: Jul 18^th, 2014 at 7:16pm by rkaires »
	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

40_Rod Frequent Elocutionist Offline Extremism in the persuit of accuracy is not a vice Posts: 4285 Location: Knoxville, TN Joined: Apr 20^th, 2004	Re: .32 Miller Long Reply #1 - Jul 19^th, 2014 at 9:16am	Print Post
	The Miller long is a .357 Max case tapered to 32. It is the basis for the Miller short. If you download the Miller short and take the base angle and extend it out to max length you have the case. 40 Rod


	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: .32 Miller Long Reply #2 - Jul 19^th, 2014 at 9:23am	Print Post
	John, So the Miller is just a .357Max tapered to .32 with no trimming involved. Basically its similar to your .32-30 IMP without a neck. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

40_Rod Frequent Elocutionist Offline Extremism in the persuit of accuracy is not a vice Posts: 4285 Location: Knoxville, TN Joined: Apr 20^th, 2004	Re: .32 Miller Long Reply #3 - Jul 20^th, 2014 at 8:35am	Print Post
	It is very similar. Frankly if I had known then what I know now The only thing that I would have changed would be to have left the first .200” at the base straight and then started my taper. I just came at mine from a different direction to get to pretty much the same place. 40 Rod


	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: .32 Miller Long Reply #4 - Jul 20^th, 2014 at 2:06pm	Print Post
	Thanks John. I've been doing a little research into different cartridges to use for a RKS barreled bench rifle. I don't want to reinvent the wheel as you guys put a lot of R&D into whats currently available. I do want something that can be made from a parent case that's easy to obtain like the 357max or 30-30. Some of the cartridges I'm looking into are; .32 RKS .32-30 IMP .32 Miller long .32-222R 8.15x46R Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7601 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: .32 Miller Long Reply #5 - Jul 20^th, 2014 at 2:54pm	Print Post
	The simple way to rechamber your rifle is to just go 32 RKS. It's my understanding that the RKS chambers are done by running the junction of shoulder to case body of the 223 reamer in 1.47, nothing more. A very simple chamber. The shoulder angle (23 deg) forms the throat of the chamber. Very simular to the way that the 32/40 makes the throat at 21.5 deg. You then cut the rim and headspace with a boring bar. Frank
	« Last Edit: Jul 20^th, 2014 at 3:03pm by frnkeore »
	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: .32 Miller Long Reply #6 - Jul 20^th, 2014 at 3:49pm	Print Post
	frnkeore wrote on Jul 20^th, 2014 at 2:54pm: The simple way to rechamber your rifle is to just go 32 RKS. It's my understanding that the RKS chambers are done by running the junction of shoulder to case body of the 223 reamer in 1.47, nothing more. A very simple chamber. The shoulder angle (23 deg) forms the throat of the chamber. Very simular to the way that the 32/40 makes the throat at 21.5 deg. You then cut the rim and headspace with a boring bar. Frank Thanks for the feedback. It sure does sound like the simple solution. The .32 RKS seems to have a great track record as well. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: .32 Miller Long Reply #7 - Jul 23^rd, 2014 at 3:06pm	Print Post
	Re .32-222R I was at CPA today and had a look at their .32-222R reamer. Paul put a caliper to it. It appears that it can be made with a full length 357 max case straight tapered to .32.

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1671 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: .32 Miller Long Reply #8 - Sep 10^th, 2014 at 9:46am	Print Post
	Decided to go .32RKS for a CPA bench gun. The barrels on order from Ron Smith and the reamer from PTG.

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.0163 seconds.