ASSRA Forum - 28-30 Bench Gun

ASSRA Forum › General › Rifle Photos › 28-30 Bench Gun

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

28-30 Bench Gun (Read 7954 times)

Skalkaho Oldtimer Offline Posts: 771 Location: Montana Joined: Sep 29^th, 2006	28-30 Bench Gun May 31^st, 2014 at 9:26am	Print Post
	Heres my 28-30....shoots OK I guess....The Bullet Gods were with we for this target. 12.0 gr 4227, PJ 175 gr, 1-16 cast, Breech.
	« Last Edit: May 31^st, 2014 at 9:39am by Skalkaho »
	May the Bullet Gods be with you.......
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1630 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: 28-30 Bench Gun Reply #1 - May 31^st, 2014 at 9:33am	Print Post
	That's some fine shooting Skalkaho. Is your 28-20 based on the 32-20 case? Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

Skalkaho Oldtimer Offline Posts: 771 Location: Montana Joined: Sep 29^th, 2006	Re: 28-30 Bench Gun Reply #2 - May 31^st, 2014 at 9:43am	Print Post
	My typo error Bob,is 28-30 not 28-20, changed it. Based on a 25-35 opened up straight taper. Heres pic of 38-55, 32-40 and 28-30 before cutting down and cut down to 25-35 height( really should be called 28-35? ) Pete

	May the Bullet Gods be with you.......
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: 28-30 Bench Gun Reply #3 - May 31^st, 2014 at 11:52am	Print Post
	Pete I am also shooting a 28, the case is simply the 25-35 WW case blown out to 28. Maybe more properly called a 28-35. I like your case design and it seems to be working very well for you. JLouis

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2256 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: 28-30 Bench Gun Reply #4 - Jun 2^nd, 2014 at 10:40am	Print Post
	Pete it looks like it shoots pretty well for you When I looked at the stock on that rifle I thought gee, that looks a lot like the stock on my .38-50. I just realized you are the same Pete that I bought that excellent rifle fom Chris.


	IP Logged

Walter Matera Ex Member	Re: 28-30 Bench Gun Reply #5 - Jun 4^th, 2014 at 1:32pm	Print Post
	Very impressive, the gun, the target, the workmanship and the marksmanship, all of them.


	IP Logged

harry_eales Ex Member	Re: 28-30 Bench Gun Reply #6 - Jun 5^th, 2014 at 1:08am	Print Post
	Quote: Very impressive, the gun, the target, the workmanship and the marksmanship, all of them. I couldn't agree more Walter, but I do feel somewhat sorry for the man who had to score that target. Harry


	IP Logged

GeorgeC Oldtimer Offline ASSRA 11411 Posts: 521 Location: Madison, IN Joined: Dec 27^th, 2012	Re: 28-30 Bench Gun Reply #7 - Jun 20^th, 2014 at 7:46pm	Print Post
	I count 7 x's. Seriously, how was your target scored? That is some great shooting.

	Never mind the mule. Just load the wagon.
	Facebook IP Logged

Schuetzendave Frequent Elocutionist Offline Retired Ex-Shooter Posts: 4016 Location: St. Albert, Alberta Joined: Jan 28^th, 2005	Re: 28-30 Bench Gun Reply #8 - Jun 21^st, 2014 at 7:00am	Print Post
	You've got that puppy fine tuned. Good shooting.


	IP Logged

Skalkaho Oldtimer Offline Posts: 771 Location: Montana Joined: Sep 29^th, 2006	Re: 28-30 Bench Gun Reply #9 - Jun 21^st, 2014 at 10:57am	Print Post
	Need to reply to all, just real busy lately. Yes the gun is A joy to shoot. 12 twist barrel, as one member asked, so there it is. Was built over 25 years ago and never shot. So I was the lucky one to wring it out and figure out the brass swaging, etc with the dies supplied. Thanks, Pete

	May the Bullet Gods be with you.......
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.4385 seconds.