ASSRA Forum - cpa 32-40 on the way

ASSRA Forum › General › Single Shot Rifles › cpa 32-40 on the way

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

cpa 32-40 on the way (Read 5955 times)

argie1891 Senior Forum Member Offline Posts: 262 Location: selah, washington Joined: Jul 8^th, 2010	cpa 32-40 on the way Apr 16^th, 2014 at 3:47am	Print Post
	talked to Gail today my rifle is completed and should be shipped today or tomorrow. I just had to post this as I am excited to shoot it. joe

	if you think you have it figured out then you just dont understand
	IP Logged

rkaires Frequent Elocutionist Offline No Stronger Bond Posts: 1627 Location: Dingmans Ferry, PA Joined: Oct 26^th, 2012	Re: cpa 32-40 on the way Reply #1 - Apr 16^th, 2014 at 6:42am	Print Post
	Enjoy your rifle and be sure to post some pictures. Be warned. Once you get one its hard not to come up with a reason to buy another. Bob

	ASSRA #11031 NRA Life Proud Noodlehead "Peace is that brief, glorious moment in history, when everybody stands around reloading."~ ~ Thomas Jefferson
	IP Logged

ron Oldtimer Offline Posts: 576 Location: Augusta Maine Joined: Nov 15^th, 2009	Re: cpa 32-40 on the way Reply #2 - Apr 16^th, 2014 at 6:53am	Print Post
	I ordered my second receiver a week ago. ron


	IP Logged

gewehrfreund Senior Forum Member Online Posts: 420 Location: Cortland Joined: Jan 24^th, 2005	Re: cpa 32-40 on the way Reply #3 - Apr 16^th, 2014 at 7:23am	Print Post
	I am sorely tempted to have a 32-40 barrel made for my 44 1/2 22-15 to make it a little more shooter friendly.


	IP Logged

sherbs Participating Member Offline Posts: 48 Joined: Oct 27^th, 2013	Re: cpa 32-40 on the way Reply #4 - Apr 20^th, 2014 at 11:55am	Print Post
	How long did your rifle take to ship after you ordered it?


	IP Logged

argie1891 Senior Forum Member Offline Posts: 262 Location: selah, washington Joined: Jul 8^th, 2010	Re: cpa 32-40 on the way Reply #5 - Apr 23^rd, 2014 at 8:49pm	Print Post
	talked to gail the rifle she said the rifle was done a week ago, but then it needed some final adjustment. anyway it now has been shipped and according to the tracking information should reach me on the 29th. really not a long wait for a custom rifle. I ordered on feb,3, and will get it on april 29. I gota admit it could have taken longer. however that said the wait has been difficult as I am not a very patient person. I am sure I will be happy with it. I haven't seen but a few cpa rifles but those I have seen were works of art. argie1891

	if you think you have it figured out then you just dont understand
	IP Logged

John Boy Ex Member	Re: cpa 32-40 on the way Reply #6 - Apr 23^rd, 2014 at 9:02pm	Print Post
	86 days ... Feb 3rd to Apr 29th 7,430,400 seconds 123,840 minutes 2064 hours 86 days 12 weeks (rounded down) Not too shabby for a custom rifle. Order a Shiloh and your looking close to 2 years! Argie - Congratulations on your new 32-40. Don't let us down ... Pictures! BTW - What's going to be your next barrel caliber?


	IP Logged

argie1891 Senior Forum Member Offline Posts: 262 Location: selah, washington Joined: Jul 8^th, 2010	Re: cpa 32-40 on the way Reply #7 - Apr 23^rd, 2014 at 11:07pm	Print Post
	Argie - Congratulations on your new 32-40. Don't let us down ... Pictures! BTW - What's going to be your next barrel caliber? Grin now that is a good question.... I have a stevens m-44 that I converted to 25/20 Winchester. and I have a marlin cowboy in 38-55. I really like both calibers. it may sound stupid but I think a plain 30/30 Winchester would make a neat single shot. anyone have one in 30-30????? Regards

	if you think you have it figured out then you just dont understand
	IP Logged

argie1891 Senior Forum Member Offline Posts: 262 Location: selah, washington Joined: Jul 8^th, 2010	Re: cpa 32-40 on the way Reply #8 - Apr 30^th, 2014 at 10:29pm	Print Post
	I shot my new cpa for the first time today and I gota say I sold several handguns and rifles to be able to afford it... now I am thinking about selling some more. damn I didn't know what I had been missing. I wasn't sure about breach seating as I hadn't even seen it done before.. just like making love read the book and the rest comes naturally. wow I am going to the range again tomorrow I had 20 cases loaded with powder and felt wads and loaded 10 or so at the range. the only thing different I am going to do is increase the powder charge by 1 gr. to 14.5 gr. of 4227. I think it needs a bit more to burn the powder more effectively. why didn't I learn about this when I was younger. weighed my rifle it came in at 12.5 lbs with leupold 24 power scope. ok enough I gota go clean my rifle don't have time to type. argie1891

	if you think you have it figured out then you just dont understand
	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10624 Joined: Apr 8^th, 2009	Re: cpa 32-40 on the way Reply #9 - May 1^st, 2014 at 8:06am	Print Post
	Congratulations on both the purchase and the out of the box success, it can only get better from here. I am extremely happy to hear that the mould seems to be working out for you. I had allot of success with that bullet my friend and I hope you have the same. Beautiful Rifle! JLouis

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

John Boy Ex Member	Re: cpa 32-40 on the way Reply #10 - May 1^st, 2014 at 11:05am	Print Post
	Quote: I think a plain 30/30 Winchester would make a neat single shot. anyone have one in 30-30? Not a single shot 30-30 but I feed this reload single shot into my '94 Winchester (You need to *Login* or *Register* to view media files and links) Buy the Ideal 311413 mold on eBay, I see it frequently listed


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.3861 seconds.