ASSRA Forum - Browning 1885 low wall primer hit

ASSRA Forum › General › Single Shot Rifles › Browning 1885 low wall primer hit

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Browning 1885 low wall primer hit (Read 2771 times)

loiblb Newbie Offline Posts: 8 Joined: Feb 23^rd, 2013	Browning 1885 low wall primer hit Apr 9^th, 2014 at 5:31pm	Print Post
	My Browning .223 low wall feels like it hits good but it's hits very light or will punch through the primer. All with new factory ammo. The gun shoots tight groups not even flyers, but something's not working. What could be the problem? Thanks


	IP Logged

JLouis Frequent Elocutionist Offline Posts: 10625 Joined: Apr 8^th, 2009	Re: Browning 1885 low wall primer hit Reply #1 - Apr 9^th, 2014 at 6:10pm	Print Post
	How much headspace do you have?

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

ClaMar Full Member Offline Posts: 141 Location: Texas Joined: Jul 23^rd, 2013	Re: Browning 1885 low wall primer hit Reply #2 - Apr 9^th, 2014 at 9:14pm	Print Post
	Factory ammo or hand loads? Clarence


	IP Logged

Singleshotlover Ex Member	Re: Browning 1885 low wall primer hit Reply #3 - Apr 10^th, 2014 at 12:18am	Print Post
	Regarding the pierced primers.Check the tip of your firing pin for any pitting or cratering on the firing pin. The hot gasses will actually eat away the metal and over time will only get worse leading to more damage to the firing pin and more pierced primers. Had a shooter with a rem 700 in 223. Showed me the pierced primers. Took apart the bolt and little pieces of primer came out and the tip of the firing pin was badly gas cut. Frank


	IP Logged

colo native Oldtimer Offline Posts: 760 Location: Barren Ridge, Va Joined: Dec 27^th, 2007	Re: Browning 1885 low wall primer hit Reply #4 - Apr 10^th, 2014 at 8:47pm	Print Post
	Texmac on this forum is the expert to ask, he sleeps with these....


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9028 seconds.