Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Kahles scopes and how they work. (Read 1498 times)
Nero
Frequent Elocutionist
*****
Offline



Posts: 1005
Location: NZ
Joined: Jun 1st, 2006
Kahles scopes and how they work.
Mar 30th, 2014 at 9:37pm
Print Post  
I know the old saying of only an expert or a fool will take a scope to pieces but I recently bought an old four power Kahles scope off the net and found the innards were seized up and the guy I bought it off reckons it was alright when he sent it and I must have done something to it and will not take it back.
Oh well into each life a little rain must fall.
The adjustment knobs are very stiff to turn and the point of impact does not shift.
I like these old German scopes because unlike the modern ones they are so much slimmer at the rear end and are better when using them on a small Martini action. 
More room to put a cartridge in and extract.
How does the reticle work though when you turn the adjustment knobs?
Regards, Roly
« Last Edit: Mar 31st, 2014 at 1:56am by Nero »  
Back to top
 
IP Logged
 
deadwooddick
Full Member
***
Offline



Posts: 105
Location: Deadwood
Joined: Mar 10th, 2008
Re: Kahles scopes and how they work.
Reply #1 - Mar 31st, 2014 at 11:22am
Print Post  
Nero wrote on Mar 30th, 2014 at 9:37pm:
How does the reticle work though when you turn the adjustment knobs?
Regards, Roly


AFAIK, the reticle is part of a "cartridge" that is "usually" supported by 1) the windage mechanism, 2) one for the elevation and 3) a single leaf spring that provides pressure in a manner that maintains stable positioning. Some scopes have two springs, opposite the two knobs.

HTH
  
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2232
Location: Colorado
Joined: May 15th, 2008
Re: Kahles scopes and how they work.
Reply #2 - Mar 31st, 2014 at 11:44am
Print Post  
Don't have an answer. Looks like you have two choices. Send it to an expert to fix it or decide it is worthless and try to fix it yourself. Internal adjustment reticles are usually in a spring loaded ring or tube that is moved back and forth by the knobs. Some have separate adjustments for windage and elevation. Almost guess a broken spring but maybe just gummed up knobs. Think your chances are somewhat less than 50-50 but might work and you will learn something.
Chuck 
  
Back to top
 
IP Logged
 
ziplocjoe
Junior Member
**
Offline



Posts: 74
Location: Illinois
Joined: Aug 23rd, 2008
Re: Kahles scopes and how they work.
Reply #3 - Mar 31st, 2014 at 4:40pm
Print Post  
Nero, for a nice scope for a small frame Martini take a look at the Leupold 2X7X 28mm ultralight. It weighs about 8 oz. and the bell ends are smaller.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint