ASSRA Forum - N02 Rolling Block Tang Sight

ASSRA Forum › General › General Discussion › N02 Rolling Block Tang Sight

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

N02 Rolling Block Tang Sight (Read 2891 times)

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	N02 Rolling Block Tang Sight Mar 8^th, 2014 at 10:59pm	Print Post
	I have a tang sight with the letters RA on the base, it is curved for a No.2 RB, in fact it was mounted on one I picked up., also has a Beech front sight with it Is this the sight a few individuals were lamenting about owning Could be for sale if I knew more about what it is worth....any interest and I will post a few pictures


	IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: N02 Rolling Block Tang Sight Reply #1 - Mar 9^th, 2014 at 5:19am	Print Post
	The Lyman tang sight with the RA code was used on the #2 Rolling Block, the #3 Hepburn and the #5 Rolling Block. If you have a #1 Rolling Block properly drilled and tapped, you can use it on that as well. Sometimes the base of the RA sight was curved when installed on a #2, and sometimes not. Price depends a lot on condition of the sight, and some have preferences as to whether the sight is a 1, 1A, 2, or 2A version.

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16146 Location: Oregon Joined: Feb 2^nd, 2009	Re: N02 Rolling Block Tang Sight Reply #2 - Mar 9^th, 2014 at 4:54pm	Print Post
	The question is whether it was factory bent, or done by the owner-gunsmith when installed on a #2. I'm not certain that Lyman or Marbles made a specific sight for the #2, but maybe Rem. offered a specific sight for the model. I'd like to see a picture of your Lyman sight.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	Re: N02 Rolling Block Tang Sight Reply #3 - Mar 10^th, 2014 at 5:57pm	Print Post
	Pictures A short story will follow


	IP Logged

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	Re: N02 Rolling Block Tang Sight Reply #4 - Mar 10^th, 2014 at 5:58pm	Print Post
	picture 2


	IP Logged

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	Re: N02 Rolling Block Tang Sight Reply #5 - Mar 10^th, 2014 at 5:58pm	Print Post
	picture 3


	IP Logged

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	Re: N02 Rolling Block Tang Sight Reply #6 - Mar 10^th, 2014 at 5:59pm	Print Post
	Picture of the inside of the forend


	IP Logged

4060may Full Member Offline Posts: 177 Location: Richfield Joined: Jul 12^th, 2006	Re: N02 Rolling Block Tang Sight Reply #7 - Mar 10^th, 2014 at 6:06pm	Print Post
	Story I bought this gun from a friend of mine at a gun show...the barrel was bent, the upper tang was arc welded together..the job was done with the sight on the gun and the buttstock My friend TIG welded the tang 6 times to get the inclusions out..I polished and ground till it looked OK We made a new CF block and reamed the chamber to 32s&w long..shot OK..not great This is when we found the bent barrel..I figured someone along the way used that ol piece of iron for a prybar..I relined it with a TJ liner and chambered it in 32-20...new tang sight and front sight and it has been resurrected.....I was not trying to restore to original, so I was not concerned with some aesthetics...just shootable


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5219 seconds.