Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Wads again ...... (Read 1657 times)
RayH
Oldtimer
*****
Offline


ASSRA # 10880

Posts: 753
Location: Oldest City, FL
Joined: Jan 4th, 2012
Wads again ......
Mar 2nd, 2014 at 9:26pm
Print Post  
Three (3) areas of concern ...........  #1: Purpose - What does the wad actually do? Simply hold the powder in the case prior to firing? Position the powder more evenly toward the primer for better ignition? Protect the base of the bullet ? #2: Position: Is wad seating position a factor affecting accuracy?  Can one calculate the proper depth for wad seating to achieve optimum ignition without creating a compressed load? #3: Consequences - If a wad is positioned hard against the powder, pressing it onto the primer orifice, does this create a compressed load? And is there a sudden spike in pressure at that point?
« Last Edit: Mar 3rd, 2014 at 7:07am by RayH »  

In GOD We Trust
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1189
Location: Arizona
Joined: Sep 8th, 2006
Re: Wads again ......
Reply #1 - Mar 3rd, 2014 at 2:51pm
Print Post  
OkeyMaple
As no one else has taken on your question, I'll give it a whack.
Are you asking about over powder wads with black powder or smokeless? I'll assume smokeless.
If you read Charlie Dell's book, the Modern Schuetzen Rifle (available on this web site, see the book listing), he extensively covers over powder wads with smokeless powder.
In a nutshell, he concluded an over powder cork wad, approx .09" thick, for instance, seated in the cartridge case .1 or .2" off the powder helps with consistent powder ignition. Place that same wad on the powder and you run a very real risk of ringing your chamber. You probably would not ring the chamber with one shot but over time.
The reason I'm aware of Charlie's findings? I recently read his book.
« Last Edit: Mar 3rd, 2014 at 5:13pm by RSW »  

Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
WWW  
IP Logged
 
RayH
Oldtimer
*****
Offline


ASSRA # 10880

Posts: 753
Location: Oldest City, FL
Joined: Jan 4th, 2012
Re: Wads again ......
Reply #2 - Mar 3rd, 2014 at 6:04pm
Print Post  
Thanks, Randy.  I have the Dell/Schwartz book at my elbow and refer to it regularly. Since its publication in 1999, many new discoveries have been uncovered.  My load development education is very much like a "treasure hunt".  I inquire from various sources and always discover more than I originally sought. I suspect that there is more to this wad business than I expected. Who knows what is left to learn?
  

In GOD We Trust
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint