ASSRA Forum - Cartridge ID ... HELP !!

ASSRA Forum › General › Reloading the Single Shot Rifle › Cartridge ID ... HELP !!

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Cartridge ID ... HELP !! (Read 2475 times)

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	Cartridge ID ... HELP !! Jan 29^th, 2014 at 9:22pm	Print Post
	(You need to *Login* or *Register* to view media files and links) Posted is a chamber cast from a Steigele single shot rifle (photo's not currently available). C.O.A,L. is approx. 1.313"; neck diameter is 0.346"; length of neck is 0.450"; head diameter is 0.446"; rim diameter is 0.516"; groove-to-groove diameter is 0.312". Can anyone help identify this cartridge?

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11464 Location: Why, out West of course Joined: May 29^th, 2006	Re: Cartridge ID ... HELP !! Reply #1 - Jan 29^th, 2014 at 9:34pm	Print Post
	Thinking 8.15X24R. Neat! Would really have to see the entire rifle to substantiate that. Nice crisp close ups of the engraving and sights and and............ Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

Kermit1945 Oldtimer Offline Posts: 980 Location: In Flux Joined: Aug 31^st, 2011	Re: Cartridge ID ... HELP !! Reply #2 - Jan 30^th, 2014 at 12:28am	Print Post
	Don't try to read it, just scroll to the second photo. (You need to *Login* or *Register* to view media files and links) Keep going for some more interesting cartridge photos.

	"Speed's fine, but accuracy's final." Bill Jordan "Anything worth doing is worth doing slowly." Mae West
	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7271 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Cartridge ID ... HELP !! Reply #3 - Jan 30^th, 2014 at 2:28am	Print Post
	Quote: "head diameter is 0.446"; rim diameter is 0.516" This would be 11.5mm & 13mm Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7271 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Cartridge ID ... HELP !! Reply #4 - Jan 30^th, 2014 at 3:24am	Print Post
	If the case diameter is close to .433 (11mm) about .15 ahead of the rim, it could be the 7.5 x 36R? Frank

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	Re: Cartridge ID ... HELP !! Reply #5 - Jan 30^th, 2014 at 6:00am	Print Post
	Frank Thank you. Looks like it might be an 8x36R Now what !!?? Gary

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

QuestionableMaynard8130 Frequent Elocutionist Offline Posts: 4144 Location: Benton Harbor MI Joined: Apr 17^th, 2004	Re: Cartridge ID ... HELP !! Reply #6 - Jan 30^th, 2014 at 9:35am	Print Post
	interesting mix of German and French in the catalogue. I'm wondering if the "garden" rifles were for back yard shooting or an German/French version of the English "rook" rifles. Rocky Mtn should be able to make cases for you. DaveC made some for an oddball metric of mine back when he operated it. I just sent him a fresh Cerrosafe cast--but at his request I wrote the time and date I made the cast. that way he could calculate the shrinkage more precisely. the cases fit perfectly. They were bottlenecked on the outside with a straight walled powder chamber inside--slightly reduced capacity but not a problem at all. Accurate Molds was able to make up appropriate bullets with no problem--even stop ring designs

	sacred cows make the best burger
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.7782 seconds.