Page Index Toggle Pages: 1 [2]  Send TopicPrint
Very Hot Topic (More than 25 Replies) black powder in a BN case? (Read 14572 times)
Mick B
Frequent Elocutionist
*****
Offline



Posts: 1004
Location: 19 Ian Nicol St watson ACT aus
Joined: Apr 11th, 2013
Re: black powder in a BN case?
Reply #15 - Jan 27th, 2014 at 10:26pm
Print Post  
Perhaps I'm being a bit too hard on the 38/56, mine shoots 1.5" on a regular basis if it isn't too windy, I was hoping for regular 1" or better. I considered using smokeless but was ashamed with myself for even considering such a thing.
My current load is 60 gr of Wano 2f with a .060" LDPE wad under a PJ 325gr 20-1 bullet, breech seated .060" ahead of the case mouth. I pour the powder through a small funnel into the case.  If I use the drop tube I would need to add another wad or two to fit flush with the case mouth and still contact the powder column.
This load gives me an average MV of 1352 fps and an extreme spread of 25 fps when using CCI 200 LR primers.
CCI BR2 primers give similar results but cost more here.
Mike.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11472
Location: Why, out West of course
Joined: May 29th, 2006
Re: black powder in a BN case?
Reply #16 - Jan 27th, 2014 at 10:47pm
Print Post  
I'm going to use smokeless powder in my new 45-90 and I don't care what anyone thinks. Sooooooo.......there! (You need to Login or Register to view media files and links)



            Joe.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 2780
Location: East Olympia, WA
Joined: May 18th, 2008
Re: black powder in a BN case?
Reply #17 - Jan 27th, 2014 at 10:50pm
Print Post  
Say it ain't so Joe!   

Jack
  

ASSRA # 11318
just a bit of a hoot.
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: black powder in a BN case?
Reply #18 - Jan 27th, 2014 at 10:59pm
Print Post  
Mick - those are similar, though about 30-50fps slower then my results with Goex & Swiss. With Swiss my spread is 8-10fps. 1.5" is ~1.5MOA at 100yd/m, which is competitive for BPCR & BPTR shooting. A Schuetzen cartridge it is not, though I may shoot a match with mine in April just for fun. 

And, don't pay any attention to those anti-luddites and their new fangled ideas, like smokeless powder (though 17gr of 4227 works pretty well pushing a 279gr bullet in mine). Wink
« Last Edit: Jan 28th, 2014 at 8:54am by SSShooter »  

Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 11472
Location: Why, out West of course
Joined: May 29th, 2006
Re: black powder in a BN case?
Reply #19 - Jan 28th, 2014 at 12:32am
Print Post  
Just loaded 40 45-90's with 75gr Swiss 1 1/2.  Still suffering the effects of sticker-shock. Got to thinking what I paid for that last case of BP. That's almost a half pound of BP. See what I mean? It gets to you....doesn't it?   Cry

Squeak when I move. 

    Joe.
  

A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1675
Location: Aarschot
Joined: Jun 7th, 2004
Re: black powder in a BN case?
Reply #20 - Jan 28th, 2014 at 2:58pm
Print Post  
Except for the lone 45-70, most of my BP shooting is in BN's.  The favourite being the 500/450 no.2 Musket.
Lots of people tell bad things about BN cartridges, most of them never tried one.
Yes, it is a different animal, and listents to different rules than a straight case - but I would never go back to straight cases again.  Finicky to develop loads for?  My very 1st load in my no.2 Musket (with a mix of leftover powder) won me a match...  And let me tell you, you can get even the Brit Martini-Henry 577-450 to perform quite well.  You just need to think outside the box.  My 45-70 now is my PP rifle.  Still shoots pretty well, but the heart is with the BN cartridges.  Tried and tested?  not today, but most BP cartridges of the day actually were BN's (yes, the US were a bit of an exception).  We just need to relearn what the oldtimers knew...
  
Back to top
WWW  
IP Logged
 
GWarden
Senior Forum Member
****
Offline



Posts: 317
Location: Marshalltown   Iowa
Joined: Apr 18th, 2004
Re: black powder in a BN case?
Reply #21 - Jan 28th, 2014 at 3:21pm
Print Post  
MartiniBelgian wrote on Jan 28th, 2014 at 2:58pm:
Except for the lone 45-70, most of my BP shooting is in BN's.  The favourite being the 500/450 no.2 Musket.
Lots of people tell bad things about BN cartridges, most of them never tried one.
Yes, it is a different animal, and listents to different rules than a straight case - but I would never go back to straight cases again.  Finicky to develop loads for?  My very 1st load in my no.2 Musket (with a mix of leftover powder) won me a match...  And let me tell you, you can get even the Brit Martini-Henry 577-450 to perform quite well.  You just need to think outside the box.  My 45-70 now is my PP rifle.  Still shoots pretty well, but the heart is with the BN cartridges.  Tried and tested?  not today, but most BP cartridges of the day actually were BN's (yes, the US were a bit of an exception).  We just need to relearn what the oldtimers knew...


Just what is required different in loading the BN cartridges with BP, than the straight case?
Bob
  

Game Warden: what boys dream of being and old men wish they could have been
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1675
Location: Aarschot
Joined: Jun 7th, 2004
Re: black powder in a BN case?
Reply #22 - Jan 28th, 2014 at 4:24pm
Print Post  
In a nutshell:  Less compression, nothing beneath the neck, coarser powder granulation for a same calibre.  Fg or 1 1/2Fg works very well.  And make sure you have a good chamber configuration...  There are a few weird reamer configurations out there  which do nothing for accuracy.
Some thing remain identical: initial bullet resistance required (either neck tension or bullet seated into the rifling), good primers.
Heavy bullets will perform best - if the rifling twist will allow it, and will also reduce fouling.  And IME, the more powder, the better the round will shoot (light to moderate compression will work).
The no.2 Musket is now at about 90 grs of  1 1/2Fg and somewhere between 1300 - 1350 fps with a 530gr bullet.
  
Back to top
WWW  
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: black powder in a BN case?
Reply #23 - Jan 28th, 2014 at 5:02pm
Print Post  
Yep......... that's pretty much what I've learned over the years, other than the coarser powders. In the 38-56, most any powder works as long as there is enough to keep the wads in the neck of the case. My minimum load, which I'll be using at the Fairfax 'ram bash' at the end of Feb, is 54gr of 3F Goex with 2x0.060" wads. The bottom wad is just above the shoulder junction on the case using about 0.05" compression. Have found that the coarser the powder the more compression one can get away with, as long as the bottom wad remains in the neck.
  

Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
Bob DLT
Ex Member


Re: black powder in a BN case?
Reply #24 - Jan 29th, 2014 at 6:39pm
Print Post  
I shoot a 44-77 in BPCR rifle sil. competition.  It is extremely accurate.   The tricks that I have learned to loading this caliber are:  1.  use a coarse powder such as 1 1/2F .   2.  Drop tube the powder, but do not compress it.  3.  Make sure that the powder fills at least part of cartridge neck.  4.  One wet patch between shots (AZ is very dry).

Shoot straight!
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: black powder in a BN case?
Reply #25 - Jan 29th, 2014 at 7:42pm
Print Post  
Hi Bob - Welcome to the forum.

Good for you on using that cartridge. Have been wanting a 44-77 ever since I read in MLV's "Buffalo Rifles" book where he has an entire paragraph about how inaccurate the 44-77 is. If I ever decide I need a long-range rifle it will be an 1874 chambered in 44-77.

What is the minimum amount of powder needed to get into the case neck?
  

Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
John in PA
Oldtimer
*****
Offline



Posts: 577
Location: Hollidaysburg, PA
Joined: Nov 3rd, 2009
Re: black powder in a BN case?
Reply #26 - Feb 7th, 2014 at 7:06pm
Print Post  
I remember reading somewhere that the bottleneck cartridges yield more (perceived?) recoil for a given powder/bullet combination.  Possibly because burn rate of the charge is greater due to shorter, wider charge shape(??)
  

John Wells
Hollidaysburg, PA
Peabody and Peabody-Martini's Wanted!
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1675
Location: Aarschot
Joined: Jun 7th, 2004
Re: black powder in a BN case?
Reply #27 - Feb 8th, 2014 at 3:20am
Print Post  
Maybe that's why they are also supposed to give a higher MV with an identical charge when compared to straight cases...
  
Back to top
WWW  
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1090
Location: CT
Joined: Dec 14th, 2008
Re: black powder in a BN case?
Reply #28 - Feb 8th, 2014 at 12:13pm
Print Post  
sss  about 72   72.5 grains of 1.5  swiss will give you about .020 comp.   art
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint