ASSRA Forum - Frank Zika Mold

ASSRA Forum › General › Reloading the Single Shot Rifle › Frank Zika Mold

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Normal Topic

Frank Zika Mold (Read 2365 times)

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Frank Zika Mold Dec 4^th, 2013 at 7:55pm	Print Post
	Stop ring bullet mold with adjustable hollow base plug. Posted at DWS8130's request. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: Frank Zika Mold Reply #1 - Dec 4^th, 2013 at 7:59pm	Print Post
	Ran out of room. The bullet. Bullet is from a cold mold so doesn't look to sharp. Mold is also adjustable for length of bullet. Joe.
	« Last Edit: Dec 4^th, 2013 at 8:06pm by westerner »
	A blind squirrel runs into a tree every once in a while.
	IP Logged

QuestionableMaynard8130 Frequent Elocutionist Offline Posts: 4144 Location: Benton Harbor MI Joined: Apr 17^th, 2004	Re: Frank Zika Mold Reply #2 - Dec 4^th, 2013 at 8:23pm	Print Post
	Thanks Joe that is real interesting. I wonder why the base plug makes a flat ended rather than conical or hemispherical cavity. Maybe Frank was copying some original bullets. I know a while back, just when I was starting to get hooked on the european rifles, there was some talk on another another forum of a group design/buy for an SR bullet but, as I recall it bogged down over the the issue of the "over there" originals having hollow bases and the USA mold producer not wanting to try to do it that way.

	sacred cows make the best burger
	IP Logged

UtahDave Senior Forum Member Offline Posts: 395 Location: Heber City, Utah Joined: Aug 14^th, 2010	Re: Frank Zika Mold Reply #3 - Dec 4^th, 2013 at 8:31pm	Print Post
	Joe, Is it a hollow base? If so does it ever blow the bottom ring? Neat old mold. Do you shoot bullets from it or is just a museum piece? Dave


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: Frank Zika Mold Reply #4 - Dec 4^th, 2013 at 8:51pm	Print Post
	Biggi and I have been using the Zika bullets in our German rifles. Have not tried it cast as a hollow base. I adjusted the base plug to show how it works. Would think if the skirt is to long and thin it would blow out. DW, the round rod that makes the bullet base hollow can be turned end for end. The end shown is flat, the other end has a radius. Could make it any shape I want in the lathe. Joe.
	« Last Edit: Dec 4^th, 2013 at 9:06pm by westerner »
	A blind squirrel runs into a tree every once in a while.
	IP Logged

QuestionableMaynard8130 Frequent Elocutionist Offline Posts: 4144 Location: Benton Harbor MI Joined: Apr 17^th, 2004	Re: Frank Zika Mold Reply #5 - Dec 6^th, 2013 at 9:28pm	Print Post
	Try them some time, might be interesting From my brief look at the old catalogue pages, a fair number of the original swedged bullets offered by the german supply houses were hollow based. I wonder if that was a carry over from BP ML minie' style bullets----"the way we did it when I was young" kind of thing. or if it had actual advantage with the reduced base diameter needed to insert into the case?

	sacred cows make the best burger
	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: Frank Zika Mold Reply #6 - Dec 6^th, 2013 at 9:38pm	Print Post
	Currently using hollow base bullets in three original percussion schuetzen rifles. Have had leading problems using plain base bullets in barrels with a lot of taper or choke bored. No leading with the hollow base bullets. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.3079 seconds.