ASSRA Forum - Lyman #5 micrometer powder measure

ASSRA Forum › General › Reloading the Single Shot Rifle › Lyman #5 micrometer powder measure

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Lyman #5 micrometer powder measure (Read 2140 times)

MAD MIKE Oldtimer Offline Posts: 655 Location: So Cal Joined: Oct 31^st, 2006	Lyman #5 micrometer powder measure Nov 30^th, 2013 at 3:52pm	Print Post
	This is not mine, but if anyone is looking for a #5 micro powder measure go to; Guns International, under "reloading equipment & tools American", it's missing the cap but @ $79. ...MIKE...


	IP Logged

Redsetter Frequent Elocutionist Offline Posts: 3468 Location: New York Joined: Aug 6^th, 2013	Re: Lyman #5 micrometer powder measure Reply #1 - Nov 30^th, 2013 at 6:06pm	Print Post
	Already gone. Yet another site I never heard of.


	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3877 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: Lyman #5 micrometer powder measure Reply #2 - Nov 30^th, 2013 at 7:00pm	Print Post
	I got mine off ebay a couple of months ago with an old Lyman turret press for under 70$. One just has to watch.

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 4020 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Re: Lyman #5 micrometer powder measure Reply #3 - Dec 1^st, 2013 at 10:14pm	Print Post
	Little known fact... the #5 Micrometer works best for 4759 of anything I have been able to find. Froggie


	IP Logged

Redsetter Frequent Elocutionist Offline Posts: 3468 Location: New York Joined: Aug 6^th, 2013	Re: Lyman #5 micrometer powder measure Reply #4 - Dec 2^nd, 2013 at 11:26am	Print Post
	Green_Frog wrote on Dec 1^st, 2013 at 10:14pm: Little known fact... the #5 Micrometer works best for 4759 of anything I have been able to find. Froggie 4759, & some other long-grained powders, is the only thing I use mine for--just hate to hear all those grinding sounds with such powders in my Redding BR. And you wouldn't believe how much easier & more positive the "throw" of the handle becomes if you make a knob out of a wooden drawer pull, or something similar, & insert it into the "ring" of the handle. The #1 & #2 measures were originally supplied with just such knobs, but Ideal must have omitted them from the later models to cut costs.


	IP Logged

John Boy Ex Member	Re: Lyman #5 micrometer powder measure Reply #5 - Dec 2^nd, 2013 at 1:44pm	Print Post
	The #5 works excellently dropping fine powder too. Swiss Nul-B has a fine mesh size of 60. Set at 4.5grs, I can crank the handle dropping the exact charge into a case every time Remember: Clean the powder charger after every use!


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5574 seconds.