ASSRA Forum › General › Reloading the Single Shot Rifle › Anealing Cases
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Anealing Cases (Read 1346 times)
nuclearcricket
Oldtimer
*****
Offline



Posts: 745
Joined: Oct 15th, 2008
Anealing Cases
Nov 29th, 2013 at 11:39am
Print Post  
I have a couple of anealing questions. First off, on a bottle neck case, that has only been loaded with full power loads, is carbon build up on the neck and shoulder a good indication that they need anealed? Second, would it be a good idea to anneal cases that are old and have not been fired for over 30 years, before they are sized and loaded again?
TIA
Sam
  
Back to top
 
IP Logged
 
Paul_F.
Ex Member


Re: Anealing Cases
Reply #1 - Nov 29th, 2013 at 12:21pm
Print Post  
In my opinion, carbon buildup has absolutely nothing to do with whether a case needs annealing or not. Number of firings is a better indicator.
If you're prepping 30 year old cases to be put back in service, then I'd say yes... it would be a good idea to anneal them. Age, with previously fired brass, can occasionally harden brass - and if you're prepping them for a new life anyway, no reason not to anneal.

Hope this helps!
  
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2917
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Anealing Cases
Reply #2 - Nov 29th, 2013 at 4:17pm
Print Post  
Clean before annealing or that carbon is there to stay in some amount. For BP, would suggest your annealing the old cases.
  
Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
nuclearcricket
Oldtimer
*****
Offline



Posts: 745
Joined: Oct 15th, 2008
Re: Anealing Cases
Reply #3 - Nov 29th, 2013 at 7:16pm
Print Post  
Thanks for the info, I now have most but not quite all of the carbon off. Most of the brass is nice and shiny on the outside, still a few stray dark spots. I an not positive on the age of the brass, but stickers on several boxes are the load data from 1971. The newest that I have is a full box of factory ammo, don't know when it was purchased but the price tag is 10.95 and its a belted magnum. 
I don't know if or when it may be put into service again but the brass will get annealed before any of it is loaded again. 
Thanks all
Sam
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.3480 seconds.