ASSRA Forum › General › Reloading the Single Shot Rifle › Paper patch question
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Paper patch question (Read 7663 times)
rustyrelx
Senior Forum Member
****
Offline



Posts: 474
Location: Wallace Idaho
Joined: Oct 9th, 2007
Re: Paper patch question
Reply #15 - Dec 6th, 2013 at 2:52pm
Print Post  
Get yourself a mold for a replica .36 cap and ball pistol. The conical projectile is around .375 so its a cheep fix and the proper weight..Don
  
Back to top
 
IP Logged
 
Pacific #5
Ex Member


Re: Paper patch question
Reply #16 - Dec 19th, 2013 at 12:31am
Print Post  
JS47 wrote on Nov 28th, 2013 at 11:55pm:
I'm not an expert on paper patching but I have done some work with it.  The best paper found to date is velum.  It's the paper engineers use to draw their plans on.  You can usually buy it in tablet form at office supply shops.  Its really tough.  Cut the patch, soak in water until it curls up and lays flat again.  When you roll it on the bullet you really have to work at it to tear it and it shrinks up nice and tight.  I have lubed them with white lithium grease with teflon in spray form.  It worked great in an over sized 45-70 bore.

Shaw


I have found any petroleum lubricant and black powder are a no no, can lead to a real gunked up fouling
  
Back to top
 
IP Logged
 
MartiniBelgian
Frequent Elocutionist
*****
Offline



Posts: 1675
Location: Aarschot
Joined: Jun 7th, 2004
Re: Paper patch question
Reply #17 - Dec 21st, 2013 at 5:41pm
Print Post  
Oh really?  Good that my rifle doesn't know that.  I've shot quite a few petroleum-based lubricants through various BP rifles with no ill effects - very weird indeed...  Paraffin, Vaseline, Ballistol, microwax,....  you name it.  My current lube has quite a bit of paraffin in it and no gunked up fouling at all.

I know it's an often repeated mantra, usually by those who haven't tried it  yet.
While there may be some petroleum-based products that will give issues in a BP rifle, by no means can this be generalised.  There's plenty of stuff that will work - and work well.
  
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8141 seconds.