ASSRA Forum - Steve Brooks Moulds anyone have experience with th

ASSRA Forum › General › Reloading the Single Shot Rifle › Steve Brooks Moulds anyone have experience with th

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Steve Brooks Moulds anyone have experience with th (Read 6454 times)

henpeckedmuch Ex Member	Steve Brooks Moulds anyone have experience with th May 8^th, 2013 at 11:36am	Print Post
	I'm trying to find a mould for an 1882 Maynard. I only shoot fixed, I have contacted Mr. Brooks and he will make one for me, 4 to 5 weeks for delivery. Have any of you had experience with him or his moulds.


	IP Logged

gunlaker Frequent Elocutionist Offline Posts: 2271 Location: lower mainland, B.C. Joined: Dec 13^th, 2010	Re: Steve Brooks Moulds anyone have experience with th Reply #1 - May 8^th, 2013 at 12:14pm	Print Post
	I've got a couple of his moulds and will buy more from him. All of the dimensions came out as I requested and the bullets are round to within half a thousands of an inch or better. He and his wife seem like nice people to do business with too. Chris.


	IP Logged

Jerry_H Ex Member	Re: Steve Brooks Moulds anyone have experience with th Reply #2 - May 8^th, 2013 at 5:44pm	Print Post
	Steve and Gayle are two of the nicest people you will ever deal with. I've used one of Steve's moulds for my 45-70 BPCR in silhouette for a few years now. I had been stuck in AAA for some time and moved into Master shortly after using his mould. You won't be sorry if you order one from him. Jerry_H


	IP Logged

CanoeRoller Ex Member	Re: Steve Brooks Moulds anyone have experience with th Reply #3 - May 8^th, 2013 at 9:53pm	Print Post
	I bought my first Brooks mold more than 20 years ago. He is one of the most pleasant people you could ever hope to meet. His molds are the highest quality, made as close to your specifications as is possible. My mold produces exactly the bullet I asked for, one that fit my old Remington rolling block. Steve slugged the barrel and produced a 423 grain masterpiece.


	IP Logged

CanoeRoller Ex Member	Re: Steve Brooks Moulds anyone have experience with th Reply #4 - May 8^th, 2013 at 9:53pm	Print Post
	I bought my first Brooks mold more than 20 years ago. He is one of the most pleasant people you could ever hope to meet. His molds are the highest quality, made as close to your specifications as is possible. My mold produces exactly the bullet I asked for, one that fit my old Remington rolling block. Steve slugged the barrel and produced a 423 grain masterpiece.


	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: Steve Brooks Moulds anyone have experience with th Reply #5 - May 8^th, 2013 at 10:12pm	Print Post
	Been using his 305gr 38cal and 410 40cal mould for the short-line and have a 345gr 'Money' style 38cal mould on order. Excellent moulds and service.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

CaryT Full Member Offline Posts: 185 Location: Yelm, WA Joined: Sep 28^th, 2012	Re: Steve Brooks Moulds anyone have experience with th Reply #6 - May 9^th, 2013 at 10:35am	Print Post
	Quality Guy, Quality Shooter, Quality Molds. I do use several of his. Cary


	IP Logged

Deadeye Bly Frequent Elocutionist Offline Posts: 1057 Location: Stephens City Joined: Feb 25^th, 2011	Re: Steve Brooks Moulds anyone have experience with th Reply #7 - May 9^th, 2013 at 12:28pm	Print Post
	Steve Brooks makes good molds. I have two of them a .40 and a .45 Creedmoor style. Both came in exactly as I had specified. I would buy another if I need one.


	IP Logged

henpeckedmuch Ex Member	Re: Steve Brooks Moulds anyone have experience with th Reply #8 - May 9^th, 2013 at 9:26pm	Print Post
	Those are some very good praises, thanks guys I'm going to order mine tomorrow.


	IP Logged

hwshooter Junior Member Offline Posts: 53 Location: right side of Ore-gone Joined: Mar 24^th, 2008	Re: Steve Brooks Moulds anyone have experience with th Reply #9 - May 9^th, 2013 at 9:44pm	Print Post
	I have used Steve's Moulds for 10+ years now. If you have him build you one you won't be sorry. Steve and Gale are very fine people. He also can give you some of the best advice He's a BPCR silhouette National champion. He also builds some very fine custom knifes. Ask him about the vented sprure plate he makes. Good Shooting Mike


	IP Logged

bnice Frequent Elocutionist Offline Posts: 1851 Location: Iowa Joined: Nov 30^th, 2006	Re: Steve Brooks Moulds anyone have experience with th Reply #10 - May 10^th, 2013 at 9:42pm	Print Post
	I have a couple of his moulds and they are top notch. He and his wife have been great to deal with.


	IP Logged

ireload2 Full Member Offline Posts: 169 Joined: Jul 9^th, 2009	Re: Steve Brooks Moulds anyone have experience with th Reply #11 - May 11^th, 2013 at 1:39am	Print Post
	He made the finest mould I have ever used. It is a 45 cal Government style that weighs 510 grains. My 45-70s give the best cast bullet accuracy I have ever seen with this mould.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›