ASSRA Forum - 40-65 - Smokeless loads?

ASSRA Forum › General › Reloading the Single Shot Rifle › 40-65 - Smokeless loads?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

40-65 - Smokeless loads? (Read 6544 times)

SchwarzStock Frequent Elocutionist Offline Posts: 1161 Location: SchwarzWald Joined: Mar 23^rd, 2010	40-65 - Smokeless loads? Apr 2^nd, 2013 at 4:00pm	Print Post
	Nayone have much experience withe the 40-65 and white powder? SS

	If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
	IP Logged

boats Frequent Elocutionist Offline Posts: 7545 Location: Virginia Joined: Apr 23^rd, 2004	Re: 40-65 - Smokeless loads? Reply #1 - Apr 2^nd, 2013 at 4:21pm	Print Post
	I am getting ready to find out, soon as my 40-65 CPA is ready. If the 45/70 is any indication best with Black Powder almost as good with 4759. Exception is extremely light gallery loads with light bullets a fast pistol powders like Unique can do well. Duplicate black powder ballistics with smokeless, 4759 is always the best choice for large capacity straight cases. Boats


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: 40-65 - Smokeless loads? Reply #2 - Apr 2^nd, 2013 at 4:48pm	Print Post
	Twenty grains IMR 4227 no wad. Ron long tapered 20-1, 400 grain spitzer. Breech seated is capable of 250s. Fixed is not as accurate and about like my best fixed duplex loads. The 40/65 W round is extremely accurate. Think of it as a scaled up 32/40. Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

John Boy Ex Member	Re: 40-65 - Smokeless loads? Reply #3 - Apr 2^nd, 2013 at 4:54pm	Print Post
	(You need to *Login* or *Register* to view media files and links) 410 gr. NASA bullet over 67 grs. of 3f Goex express or 67gr of KIK FFFg


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: 40-65 - Smokeless loads? Reply #4 - Apr 2^nd, 2013 at 5:31pm	Print Post
	Quote: (You need to *Login* or *Register* to view media files and links) 410 gr. NASA bullet over 67 grs. of 3f Goex express or 67gr of KIK FFFg The thread is about smokeless powder John Boy! Not black powder. Pay attention! Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

boats Frequent Elocutionist Offline Posts: 7545 Location: Virginia Joined: Apr 23^rd, 2004	Re: 40-65 - Smokeless loads? Reply #5 - Apr 2^nd, 2013 at 5:49pm	Print Post
	Joe I have converted several of my 4759 loads to 4227, beacuse it measures so nice. Will have to try it in the 40/65 Old rule was 4227 38/55 and smaller 4759 38/55 and larger. Guess the rule can streach to the 40's too Boats


	IP Logged

Schuetzendave Frequent Elocutionist Offline Retired Ex-Shooter Posts: 4041 Location: St. Albert, Alberta Joined: Jan 28^th, 2005	Re: 40-65 - Smokeless loads? Reply #6 - Apr 2^nd, 2013 at 7:23pm	Print Post
	Lyman #40663 Postell 415.5 grains 20:1 Lead:Tin 33.1 grains Varget Winchester primer Starline cases black water pipe insulation wad under bullet 0.410" 10 shot group In .40-65 WCF S.D. Meachem HighWall (0.410 diameter bullet in .408 bore)


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11462 Location: Why, out West of course Joined: May 29^th, 2006	Re: 40-65 - Smokeless loads? Reply #7 - Apr 2^nd, 2013 at 8:15pm	Print Post
	Boats, never tried 4759 in the 40/65. I keep the stuff around in case I run out of 4227. Dave, ten shots measuring .410? Assuming that's at one hundred meters/yards? That's another hundred bucks Joe Brennan owes you! Or should it be two hundred? Joe.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

Schuetzendave Frequent Elocutionist Offline Retired Ex-Shooter Posts: 4041 Location: St. Albert, Alberta Joined: Jan 28^th, 2005	Re: 40-65 - Smokeless loads? Reply #8 - Apr 2^nd, 2013 at 9:08pm	Print Post
	Yes it was 100 yards. Another rifle I custom loaded to assess the best sweet spot with tenth grain powder loads. Meachem makes pretty good rifles. That's another hundred bucks Joe Brennan owes you! Unfortunately the 3 ten shot groups were on different targets and I never fired five groups. Guess I did not meet Joe's rules. Not sure how long it took me since I watched the wind real careful that day. Spent a whole afternoon shooting the 3 groups. This is the best 40 or 45 caliber group size I have shot. Key was using fire formed cases, inline seated with zero run out and .002 bell to center the case in the chamber in addition to finding the powder load that provided the minimal barrel vibrations. Unfortunately the Lyman bullets start to scatter at 300 yards.
	« Last Edit: Apr 2^nd, 2013 at 9:27pm by Schuetzendave »

	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3877 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: 40-65 - Smokeless loads? Reply #9 - Apr 3^rd, 2013 at 7:24am	Print Post
	I shoot the .405Win. I Like the 40-300 rcbs, have not worked up loads yet for the 350 and 400gr. 10gr of Unique with a 3/4" square of paper towel just under the bullet (to reduce volume and move powder somewhat down to the primer) yields a CLEAN burning load).

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: 40-65 - Smokeless loads? Reply #10 - Apr 3^rd, 2013 at 7:46am	Print Post
	Cat_Whisperer wrote on Apr 3^rd, 2013 at 7:24am: I shoot the .405Win. Are you shooting one of the Douglas 0.410" barrels? If so, I have a 370gr mould that throws a 0.410"+ bullet that might work for you. Getting my Douglas barreled CPA back this week and hoping that it will make a good 200yd bullet.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3877 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: 40-65 - Smokeless loads? Reply #11 - Apr 3^rd, 2013 at 10:55am	Print Post
	SSShooter wrote on Apr 3^rd, 2013 at 7:46am: Cat_Whisperer wrote on Apr 3^rd, 2013 at 7:24am: I shoot the .405Win. Are you shooting one of the Douglas 0.410" barrels? If so, I have a 370gr mould that throws a 0.410"+ bullet that might work for you. Getting my Douglas barreled CPA back this week and hoping that it will make a good 200yd bullet. The Ruger #1 Tropical has a standard Ruger bbl on it (yes, .410 dia), I'll know this weekend what the High Wall has on it (I assume it's original, but it might not be). At some time I would like to explore the accuracy potential of other bullets.

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16091 Location: Oregon Joined: Feb 2^nd, 2009	Re: 40-65 - Smokeless loads? Reply #12 - Apr 3^rd, 2013 at 12:02pm	Print Post
	westerner wrote on Apr 2^nd, 2013 at 4:48pm: Twenty grains IMR 4227 no wad. Ron long tapered 20-1, 400 grain spitzer. Breech seated is capable of 250s. Fixed is not as accurate and about like my best fixed duplex loads. The 40/65 W round is extremely accurate. Think of it as a scaled up 32/40. Joe. I don't have much experience with the .40-65, as I only have one gun in the caliber, but I have several in .40-60 Marlin, which is almost identical. The load Joe specified is a great one that works well in most of my old 1881 Marlins in .40-60M.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.8910 seconds.