Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Identifying a Smokeless Powder Hepburn (Read 14525 times)
vol717
Full Member
***
Offline



Posts: 100
Location: Tennessee
Joined: Feb 17th, 2007
Identifying a Smokeless Powder Hepburn
Oct 5th, 2012 at 8:20am
Print Post  
I have been offered a Remington Hepburn in .30-40 Krag.  It has a Remington-marked barrel, 30 inches long with a bubble level front sight.  The top of the barrel is roll marked with "Remington Arms, Ilion N.Y. USA"   The caliber is marked on the underside with a hand stamp simply "30.40 ".  As roll marking is impossible to do without the machine and dies, I know that the barrel is legitimate.  But an acquaintance told me that all smokeless powder Hepburns were blued and this action has traces of color casehardening on it.   How, other than the finish, can I identify this action as smokeless powder?  The serial number is about 7500, which would be late in the Hepburn production history, I have been told.  This rifle has a shotgun butt and very nice wood with checkering.   The barrel only has a front sight mounted. There is no provision for a rear sight on the barrel.  The rifle does not have a rear sight, but there are filled holes on the heel of the stock where a back position sight was mounted at one time.  I have a line on a Lyman tang sight that came off a Hepburn so I will be able to shoot the gun should I acquire it.   The price is pretty high, but I am willing to pay it if I can determine that this is a smokeless powder Hepburn.   What should I look for on the action to determine that?   I can't post photos now, but I will do that here once I acquire the rifle.   

Also, if smokeless powder Hepburns are as rare as I have been lead to believe, what is a fair price to pay for this gun?  The bluing on the barrel and the wood finish are in very high condition. The action has some pitting on the top and is a mixture of brown with some casehardening in places.  The bore is perfect.  It  seems to me that the gun may have been rebarreled by Remington at some point. 

Thanks.

Allan
  
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2238
Location: Colorado
Joined: May 15th, 2008
Re: Identifying a Smokeless Powder Hepburn
Reply #1 - Oct 5th, 2012 at 10:47am
Print Post  
Sounds like a nice rifle but will someone knowledgeable reply to this? It is my impression that they quit making Hepburn's before smokeless powder became common and don't think Remington ever rebarreled or rechambered one for smokeless calibers. It is a stout action and suitable for proper smokeless loads. If the action is blued, it is a rework. Someone can correct me.
Chuck
  
Back to top
 
IP Logged
 
32-35
Junior Member
**
Offline



Posts: 79
Joined: Jul 10th, 2007
Re: Identifying a Smokeless Powder Hepburn
Reply #2 - Oct 5th, 2012 at 11:17am
Print Post  
One basic thing you can do is take off the forearm and see if the barrel has a matching serial number. This will at least tell you that the frame was originally configured for a smokeless powder cartridge.

John Gross
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1196
Location: Arizona
Joined: Sep 8th, 2006
Re: Identifying a Smokeless Powder Hepburn
Reply #3 - Oct 5th, 2012 at 11:19am
Print Post  
vol717
Maybe I'm too cynical but have you checked to see if that barrel has been re-lined? That's not necessarily a bad thing but if you intend to shoot it very much, the barrel re-line job needs to be well executed.
  

Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
WWW  
IP Logged
 
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: Identifying a Smokeless Powder Hepburn
Reply #4 - Oct 5th, 2012 at 12:07pm
Print Post  
You might want to look at J. J. Grant's book Single-Shot Rifles. 

Grant quotes from the Remington catalog that "The continued demand for our single-shot No. 3 rifle for high-power ammunition has induced us to adapt this celebrated rifle to the high pressure cartridges by substituting the improved breechblock, using the necessary small firing pin and special Ordinance steel barrel."

Grant goes on to say that the rifle was made with round ordinance steel barrels, with a rifle butt plate, case-hardened frame and mountings, open hunting sights, and checkered pistol-grip walnut stock. Barrel lengths were 26" (standard), 28" , and 30 inches. Available cartridges were 30/30, 30/40, 32 Special HP, 32/40 HP, 38/55 HP, 38/72. 
Weight: 8 lbs, Price: $20

Extras: Double-set triggers to order $3.50, Shotgun butt to order $2.00

  

There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
vol717
Full Member
***
Offline



Posts: 100
Location: Tennessee
Joined: Feb 17th, 2007
Re: Identifying a Smokeless Powder Hepburn
Reply #5 - Oct 5th, 2012 at 12:28pm
Print Post  
From the quote from Grant's book, this sounds like the rifle I'm looking at.  The barrel is round, by the way.  I'll check under the fore end for the serial number match.   The barrel has definitely not been relined.  I believe it is a legitimate correct gun in all ways.  The action has not been blued. There are traces of CC.   The Lyman tang sight that I'm buying separately came off a Hepburn.  There is no number on this sight.   

Would anyone care to take a guess on value?
  
Back to top
 
IP Logged
 
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: Identifying a Smokeless Powder Hepburn
Reply #6 - Oct 5th, 2012 at 12:46pm
Print Post  
The Lyman tang sight for the Hepburn chambered for 30/40 should have an R code stamped into the underside of the sight base.

As for price, your guess is as good as mine.    Wink
  

There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
vol717
Full Member
***
Offline



Posts: 100
Location: Tennessee
Joined: Feb 17th, 2007
Re: Identifying a Smokeless Powder Hepburn
Reply #7 - Oct 5th, 2012 at 7:47pm
Print Post  
I bought the rifle today.  The barrel does have a serial number under the fore end that matches the number on the lower tang.  This gun is number 9844, a pretty late gun in the production, I hear.  The former owner told me that it was used in competition at Seagirt.  I hope I spelled it right. I have a Lyman sight coming that came off a Hepburn.  We even measured the distance between the screws and they are consistent.   Below is a full-length photo and a link to an album with 19 photos.   Feel free to provide input.  Facts are especially appreciated, and opinion and rumor make good conversation.   

(You need to Login or Register to view media files and links)

(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Identifying a Smokeless Powder Hepburn
Reply #8 - Oct 5th, 2012 at 8:29pm
Print Post  
That is a very nice rifle and I enjoyed looking at your photobucket photos.

J.Louis
  

" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
BP
Frequent Elocutionist
*****
Offline



Posts: 8039
Location: Westside
Joined: Aug 27th, 2006
Re: Identifying a Smokeless Powder Hepburn
Reply #9 - Oct 5th, 2012 at 8:54pm
Print Post  
vol717,

Nice rifle! 

One thing that surprised me is the buttplate as it looks like a standard Rem double-barrel shotgun buttplate. The serial number, barrel address and ebony insert in the forearm tip do point to a late production rifle.

Checkering on both the wrist and forearm point to a higher than standard grade rifle, as does the Rem windage front sight with spirit level along with the lack of a rear barrel sight dovetail. I'm thinking it would have likely had a Rem factory midrange vernier tang sight at one time. 

Hope you enjoy the old gal!

  

There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves.
Proud Noodlehead
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2238
Location: Colorado
Joined: May 15th, 2008
Re: Identifying a Smokeless Powder Hepburn
Reply #10 - Oct 6th, 2012 at 9:52am
Print Post  
Very nice rifle. I was obviously incorrect. Never heard of an origional Hepburn in smokeless calibers. Thanks for putting me straight. Learned something. Sounds like firing pin diameter might tell the story. 
Chuck
  
Back to top
 
IP Logged
 
Fazer
Full Member
***
Offline



Posts: 248
Joined: Jun 9th, 2010
Re: Identifying a Smokeless Powder Hepburn
Reply #11 - Oct 6th, 2012 at 8:34pm
Print Post  
Here is another Hepburn, in 32-40. It is a late made one, so the rounds would of been smokless by then?? If that is the case, did they change the twist or anything to suite the smokeless rounds.

(You need to Login or Register to view media files and links)
« Last Edit: Oct 6th, 2012 at 8:56pm by Fazer »  
Back to top
 
IP Logged
 
vol717
Full Member
***
Offline



Posts: 100
Location: Tennessee
Joined: Feb 17th, 2007
Re: Identifying a Smokeless Powder Hepburn
Reply #12 - Oct 7th, 2012 at 3:47am
Print Post  
I was told on another site that this is  a Hi-Power model, apparently only available in .30-40 Krag, and pretty rare indeed.
  
Back to top
 
IP Logged
 
QuestionableMaynard8130
Frequent Elocutionist
*****
Offline



Posts: 4144
Location: Benton  Harbor MI
Joined: Apr 17th, 2004
Re: Identifying a Smokeless Powder Hepburn
Reply #13 - Oct 7th, 2012 at 9:31am
Print Post  
I would suggest that you contact Dick Binger,  he is a major Remington collector and exhibitor, and an acknowledged authority on the Remington rifles.  Dick is an ASSRA member and invariable helpful to members.

HE advertises regularly in the ASSRA Journal

I sent you a PM
  

sacred cows make the best burger
Back to top
 
IP Logged
 
SSShooter
Frequent Elocutionist
*****
Offline



Posts: 2923
Location: Southern NJ
Joined: Aug 1st, 2010
Re: Identifying a Smokeless Powder Hepburn
Reply #14 - Oct 7th, 2012 at 6:17pm
Print Post  
The one thing that stands out on that Hepburn is the need for you to trade me that stock for my similar stock with crescent buttplate. Wink
Very nice rifle. Per Grant's book, you will want to check that the firing pin is, indeed, the smaller one with the matching hole for the high pressure loads if you are going to be shooting anything above 1500fps, or so. If you've not taken a Hepburn apart, they are one of the more simple designs to take apart and put back together. Looking forward to getting my Hepburn in 40-65 finished (being engraved and case-hardened and a shotgun buttplate stock) for the coming silhouette/mid-range target season.
  

Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
Back to top
GTalk  
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint