ASSRA Forum › General › Reloading the Single Shot Rifle › Range Test: 8.15x46R - SR4759 & 300MP
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Range Test: 8.15x46R - SR4759 & 300MP (Read 15257 times)
waterman
Frequent Elocutionist
*****
Offline



Posts: 3002
Location: Behind the Redwood Curtain
Joined: Jun 9th, 2004
Re: Range Test: 8.15x46R - SR4759 & 300MP
Reply #15 - Aug 31st, 2011 at 9:42pm
Print Post  
John,

You wrote that you were trimming the rims on .30-30 cases.  My Haenel Original System Aydt swallows the whole .30-30 case with no trimming of either neck or rims.  My Martini is very fussy, but not the Aydt.

Waterman
  
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Range Test: 8.15x46R - SR4759 & 300MP
Reply #16 - Aug 31st, 2011 at 11:51pm
Print Post  
Waterman, in this Aydt if memory serves me, I had to reduce the rim 0.003.
  
Back to top
 
IP Logged
 
Kurt_701
Frequent Elocutionist
*****
Offline



Posts: 1052
Location: Missouri
Joined: May 20th, 2004
Re: Range Test: 8.15x46R - SR4759 & 300MP
Reply #17 - Sep 1st, 2011 at 7:58am
Print Post  
I agree with Frank.  I had my best luck with 4227-14grs. This is my Aydt. You might want to try it.
Kurt
  
M-14 3rd Battalion 27th Marines RVN 68'69'
Back to top
 
IP Logged
 
John Boy
Ex Member


Re: Range Test: 8.15x46R - SR4759 & 300MP
Reply #18 - Sep 2nd, 2011 at 11:43am
Print Post  
Continued testing of the Aydt using NRA Maintenance Target:
08/30/11 ... 200yds
12.8gr 300-MP - BACO 319180 - Fed GM215M
... 5 shots: 2 Centers - Two 10 ring - One 9 Ring
Next loads: 13.3 and 13.8gr 300-MP

5 Shot Groups - 200yds
Lyman 319227 - 16.6gr Rx7 - Rem 9 1/2 - Poor
BACO 319180 - 11.5gr 4227 - Rem 2 1/2 - Fair
BACO 319180 - 13.5gr SR4759 - Rem 2 1/2 - Fair
Fair = Wide 6 ring to 9 ring
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Range Test: 8.15x46R - SR4759 & 300MP
Reply #19 - Sep 3rd, 2011 at 7:16pm
Print Post  
John Boy you need to try the Winchester Large Rifle Magnum Primers with the 300MP none of the others worked for me in both the 32-40 & 38-55.

J.Louis
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9750 seconds.