ASSRA Forum - Bullet Mold

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1 [2]

Bullet Mold (Read 7054 times)

Babalooie Ex Member	Re: Bullet Mold Reply #15 - Aug 9^th, 2011 at 3:10am	Print Post
	Deadeye Bly wrote on Aug 8^th, 2011 at 4:10pm: Nice bullet mold! Measure it with your calipers at the diameter of the two driving bands. The 1873 guns used bullets about .423"-.424" diameter. The 1882 guns generally used bullets about .416" diameter. The mold should measure .001"-.002 over the size of the bullet it will drop. This should tell you whether you have a mold for an 1873 or 1882 rifle. It measures .425" so it must be for an 1873 rifle.


	IP Logged

Pages: 1 [2]

‹ Previous Topic | Next Topic ›

Page completed in 1.2670 seconds.