ASSRA Forum - Low Wall Lower Tang Screw

ASSRA Forum › General › General Discussion › Low Wall Lower Tang Screw

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Low Wall Lower Tang Screw (Read 1531 times)

boats Frequent Elocutionist Offline Posts: 7551 Location: Virginia Joined: Apr 23^rd, 2004	Low Wall Lower Tang Screw May 26^th, 2011 at 7:22am	Print Post
	Need a lower tang screw. Reproduction is OK whats the best source ? Boats
	« Last Edit: May 26^th, 2011 at 8:34am by boats »

	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: Low Wall Lower Tang Screw Reply #1 - May 26^th, 2011 at 7:47am	Print Post
	Wyoming Armory will likely have an original. DZ Arms will likely have a repro (You need to *Login* or *Register* to view media files and links), as will Ballard Arms and the Shiloh makers.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	GTalk IP Logged

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 4032 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Re: Low Wall Lower Tang Screw Reply #2 - May 26^th, 2011 at 2:53pm	Print Post
	boats wrote on May 26^th, 2011 at 7:22am: Need a lower tang screw. Reproduction is OK whats the best source ? Boats Hey Boats, FWIW, it's the same screw as the butt plate screws, IIRC, so it shouldn't be too hard to find. If you have trouble with it, give me a call. I probably have a couple in the parts drawers. BTW, when are you coming through again? I can provide and install it if you come to me! Regards, Froggie


	IP Logged

BP Frequent Elocutionist Offline Posts: 8039 Location: Westside Joined: Aug 27^th, 2006	Re: Low Wall Lower Tang Screw Reply #3 - May 26^th, 2011 at 3:37pm	Print Post
	Quote: it's the same screw as the butt plate screws The screw is the same as the butt plate screw except for length. The lower tang screw is actually shorter than the plate screw, but I doubt anyone would notice if you substituted in a plate screw. The lower tang screw for the Win1885 is the same one used for the Win 1873-76-86 lower tang as well. I'm pretty sure Doug Turnbull has some repros that are the proper length so you don't need to drill the stock hole any deeper.

	There are three kinds of men: The ones that learn by reading, the few who learn by observation, and the rest who have to pee on the electric fence and find out for themselves. Proud Noodlehead
	IP Logged

boats Frequent Elocutionist Offline Posts: 7551 Location: Virginia Joined: Apr 23^rd, 2004	Re: Low Wall Lower Tang Screw Reply #4 - May 26^th, 2011 at 4:01pm	Print Post
	Good tips, it's a new stock so no hole to worry about. Froggy probably couple of weeks. Boats


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.6744 seconds.