ASSRA Forum › General › Reloading the Single Shot Rifle › Starline 357 Brass for Miller 32 Short?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Starline 357 Brass for Miller 32 Short? (Read 1709 times)
Skalkaho
Oldtimer
*****
Offline



Posts: 784
Location: Montana
Joined: Sep 29th, 2006
Starline 357 Brass for Miller 32 Short?
Mar 27th, 2011 at 3:45pm
Print Post  
Is the Starline Brass thick enough in the web for use in a Miller?  Starline Brass seems to be very heavy duty brass, has anyone cut one lengthwise and compared it tp Maximum Brass?
  
May the Bullet Gods be with you.......
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4018
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: Starline 357 Brass for Miller 32 Short?
Reply #1 - Mar 27th, 2011 at 8:52pm
Print Post  
I've used Starline .357 Mag brass for several years in my Charlie Dell-built .32/357 Peregrine that uses Charlie's version of the .32 short.  It is like the Miller except has a continuous straight taper from base to mouth.  I've gotten dozens of loadings out of each and only lost a couple when I grossly overloaded them.

Froggie
  
Back to top
 
IP Logged
 
bnice
Frequent Elocutionist
*****
Offline



Posts: 1851
Location: Iowa
Joined: Nov 30th, 2006
Re: Starline 357 Brass for Miller 32 Short?
Reply #2 - Mar 31st, 2011 at 4:42pm
Print Post  
That is all I use, easier to make allot less trimming
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.9993 seconds.