ASSRA Forum › General › Collecting Single Shot Rifles › Neidner Barrels
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Neidner Barrels (Read 5128 times)
bnice
Frequent Elocutionist
*****
Offline



Posts: 1867
Location: Iowa
Joined: Nov 30th, 2006
Neidner Barrels
Jan 13th, 2011 at 5:44pm
Print Post  
I am trying to find out if anyone has the shop records for Neidner and see if it says what this .22 barrel was put on number-1493 CB. Thanks for any help. Bob
  
Back to top
 
IP Logged
 
harry_eales
Ex Member


Re: Neidner Barrels
Reply #1 - Jan 13th, 2011 at 6:01pm
Print Post  
Hello Bnice, (Bob).

Your best bet is to contact a Mr. Michael Petrov who lives in Alaska and who can be found regularly on the Doublegunforum.com

He probably knows more about Neidner and his rifles than any other man alive. If you click on his name on any of his posts you can send him a PM, once you have signed up to the Forum. (It's free of charge).

Mr. Petrov is a most obliging gentleman, and he will assist you in any way he can. I know this from personal experience.

Regards,

Harry
  
Back to top
 
IP Logged
 
s.s.jeff
Junior Member
**
Online



Posts: 66
Location: Appleton
Joined: Aug 13th, 2006
Re: Neidner Barrels
Reply #2 - Jan 13th, 2011 at 6:03pm
Print Post  
Try Michael Petrov at mjpetrov@ascalaska.net he might be able to help you out.
  
Back to top
 
IP Logged
 
.22Hepburn
Oldtimer
*****
Offline



Posts: 803
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: Neidner Barrels
Reply #3 - Jan 13th, 2011 at 6:19pm
Print Post  
+1, I have a .22 Ballard with a Neidner barrel stamped 1540CB. When I bought the gun it had Schuetzen-style wood, but I believe it was originally a position/prone gun based on the lever configuration and extra hole drilled/tapped under the forearm. I've wondered about the gun, so I'll send mr petrov a PM and see if he can help.
  
Back to top
Facebook  
IP Logged
 
.22Hepburn
Oldtimer
*****
Offline



Posts: 803
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: Neidner Barrels
Reply #4 - Jan 13th, 2011 at 6:22pm
Print Post  
'Forgot to mention, this Neidner Ballard is a tack driver!
  
Back to top
Facebook  
IP Logged
 
bnice
Frequent Elocutionist
*****
Offline



Posts: 1867
Location: Iowa
Joined: Nov 30th, 2006
Re: Neidner Barrels
Reply #5 - Jan 13th, 2011 at 9:13pm
Print Post  
Thanks I'll drop him an email.
  
Back to top
 
IP Logged
 
Hookem2530
Ex Member


Re: Neidner Barrels
Reply #6 - Jan 15th, 2011 at 7:47pm
Print Post  
bnice & 40-82Hepburn: 

Michael should have more info on what this may have been installed on, but here is the basic info on the your barrels. 

Barrel#'s 1475-1557 were produced in 1938, so this includes both barrel#'s 1493 & 1540. CB was Carlyn W. Behrman worked who made barrels from 1933 To 1939. 
You should have a roll stamp on the top of the barrel that looks like this:  NIEDNER RIFLE CORP, DOWAGIAC, MICH.

  
Back to top
 
IP Logged
 
.22Hepburn
Oldtimer
*****
Offline



Posts: 803
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: Neidner Barrels
Reply #7 - Jan 18th, 2011 at 11:57am
Print Post  
Hookem, thanks a bunch for the info. Indeed, my barrel does have that info stamped on top of the barrel. 
I have .22 Ballards by Eric & CC Johnson, Pope, Peterson, and a few custom guns with no makers' identification but I've never actually seen another Neidner (tho I know of one in the OKC area).
  
Back to top
Facebook  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8227 seconds.