ASSRA Forum › General › Reloading the Single Shot Rifle › Loading Data for .25-25 Stevens
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Loading Data for .25-25 Stevens (Read 1728 times)
.22-5-40
Oldtimer
*****
Offline



Posts: 797
Joined: Feb 13th, 2010
Loading Data for .25-25 Stevens
Jan 5th, 2011 at 12:50pm
Print Post  
Hello,  In a few months, I will be the lucky owner of a nice Ballard in .25-25 Stevens.  I have experiance loading cast in the .22 Hornet & .25-20 S.S. I have both original Ideal/Lyman & Win. moulds, as well as a 100gr. tapered Barnett mould that came with the .25-20.  I don't have brass as yet...What is the quality of the Bertrum from Buffalo Arms Co.?  What I need is smokeless load data.  I use either Hodg. or IMR 4227, & would like to try TrailBoss.  I also have 4759.  Thank you very much!
  
Back to top
 
IP Logged
 
frnkeore
Frequent Elocutionist
*****
Offline



Posts: 7261
Location: Central Point, OR 97502
Joined: Jun 16th, 2010
Re: Loading Data for .25-25 Stevens
Reply #1 - Jan 5th, 2011 at 8:07pm
Print Post  
The only loads I have are,

5.6 gr Unique, 86 gr bullet 1550 fps
9.0 gr 4198, 86 gr bullet, 1350 fps
10.2 gr 4198, 86 gr bullet, 1520 fps

I've not used any of them but, there from, Phil Sharp. J. Donnely and Cartridges of the World, in that order.

Frank
  
ASSRA Member #696, ISSA Member #339
Back to top
YIMAIM  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4888 seconds.