ASSRA Forum › General › Reloading the Single Shot Rifle › H-108 info needed
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic H-108 info needed (Read 3349 times)
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4017
Location: Lynchburg, VA
Joined: Apr 18th, 2004
H-108 info needed
Dec 31st, 2010 at 9:36am
Print Post  
Does anybody still have a copy of the load data sheet that Powder Valley used to include with orders of their H-108?  I initially bought it just to use in my .32-357 (Dell) and just ignored the other applications, but now I would like to know what else it was used/could be used for.  A scan on e-mail would be fine or I would gladly pay for a photocopy and mailing!  Smiley

TIA ~Froggie
  
Back to top
 
IP Logged
 
KAF
Ex Member


Re: H-108 info needed
Reply #1 - Dec 31st, 2010 at 9:44am
Print Post  
Frog,

Loads for AA #9 is so very close.
  
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7542
Location: Virginia
Joined: Apr 23rd, 2004
Re: H-108 info needed
Reply #2 - Dec 31st, 2010 at 10:00am
Print Post  
Did you run out of 4759 ?

Boats
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4039
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: H-108 info needed
Reply #3 - Dec 31st, 2010 at 9:47pm
Print Post  
Hodgdon Powder Co. Inc. OEM Data Maximum Loads:
Start 10% below Maximum

30 M1 Carbine:
110 gr. RN H108 13.0 gr. 1930 fps 36,900 PSI

.32-40:
202 gr. Pope H108 12.6 1368 fps 19,500 CUP
204 gr. Miller H108 12.5 1353 fps 19,500 CUP
196 gr. Hoch H108 11.0 1301 fps 19,300 CUP

.357 Magnum:
125 gr. JHP H108 17.5 gr. 1676 fps 34,400 CUP
140 gr. JHP H108 16.0 gr. 1569 fps 34,800 CUP
150 gr. JSP H108 15.0 gr. 1478 fps 33,600 CUP
158 gr. JHP H108 14.5 gr. 1401 fps 34,200 CUP
180 gr. JHP H108 12.0 gr. 1264 fps 35,400 CUP

.44 Rem. Magnum:
200 gr. JHP H108 24.0 gr. 1687 fps 34,000 CUP
225 gr. JSP H108 21.0 gr. 1586 fps 37,100 CUP
240 gr. JHP H108 20.0 gr. 1531 fps 38,200 CUP
265 gr. JFP H108 18.5 gr. 1316 fps 34,400 CUP
.410 Bore WW AA Cases WW AA .410 Wad 1/2 oz. Shot H108 12.0 gr. 1190 fps 10,900 PSI
  
Back to top
 
IP Logged
 
Green_Frog
Frequent Elocutionist
*****
Offline


"It ain't easy being green"
ASSRA Life #281

Posts: 4017
Location: Lynchburg, VA
Joined: Apr 18th, 2004
Re: H-108 info needed
Reply #4 - Jan 1st, 2011 at 12:46am
Print Post  
boats wrote on Dec 31st, 2010 at 10:00am:
Did you run out of 4759 ?

Boats


I'm down to my last 10-12 lb of 4759 for use in .32-40s and .45-70s and have about the same or a little more H-108 for my .32-357 bench gun and maybe a little experimentation with small caliber stuff.  Cool

Froggie
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4039
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: H-108 info needed
Reply #5 - Jan 1st, 2011 at 1:51am
Print Post  
Froggie:

By the time you test out the H108 it will be all gone. Why not trade it with me for whatever powder you would like. I would hate for you to work up a load and then not be able to get anymore H108.

Dave
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2475 seconds.