ASSRA Forum › General › Collecting Single Shot Rifles › Stevens barrel weight
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens barrel weight (Read 2230 times)
Andy
Ex Member


Stevens barrel weight
Mar 10th, 2010 at 8:07pm
Print Post  
Have a"Ideal" 25-20 with a #2 stamped bottom flat just aft of the round. Have 44 1/2 22 with a #2 stamped just aft of the round. Both barrels are 15/16 across the flats ahead of the receiver. Now the kicker and the reason for my question, a 44 "Range" rifle that measures 1 and a 1/16 across the flats in front of receiver also has the #2 stamped in the same place. So it would seem that the #2 is not a barrel weight? My 1902 catalog list 5 barrel weights, which do I have. This barrel is 30" long.
Thank You, Andy
  
Back to top
 
IP Logged
 
slumlord44
Frequent Elocutionist
*****
Offline



Posts: 2850
Location: Lebanon, Illinois 62254
Joined: Dec 21st, 2007
Re: Stevens barrel weight
Reply #1 - Mar 10th, 2010 at 8:17pm
Print Post  
I am thinking they should be the same measurements. The #2 was the standard barrel weight unless you special ordered something else. What caliber is the larger barrel? Not in a place where I can check my reference material at this time.
  
Back to top
 
IP Logged
 
Andy
Ex Member


Re: Stevens barrel weight
Reply #2 - Mar 10th, 2010 at 8:47pm
Print Post  
Heavy barrel is .22 L. R. with a very nice bore. Friend suggested that barrel time must be a couple seconds! 
Andy
  
Back to top
 
IP Logged
 
MAD MIKE
Oldtimer
*****
Offline



Posts: 655
Location: So Cal
Joined: Oct 31st, 2006
Re: Stevens barrel weight
Reply #3 - Mar 12th, 2010 at 3:00pm
Print Post  
Andy, I've got a 44 1/2 with a 32" full oct barrel that's almost 1 1/4" across, flat to flat & it's marked, #3. I think drinking was allowed on the job at the Stevens plant.            ...MIKE...
  
Back to top
 
IP Logged
 
Andy
Ex Member


Re: Stevens barrel weight
Reply #4 - Mar 12th, 2010 at 6:30pm
Print Post  
Mike I think the #2 stands for 2nd shift. Today I weighed my barrel and found it 6 1/2 lbs. which is close to the catalog 30" #3 weight of 6 1/4 for a 25 cal.. Amish neighbor told me that if it does not shoot he wanted it for a buggy axle. 
Andy
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7281 seconds.