ASSRA Forum - Ballistic Coefficient of hoch/darr 200 3 groove

ASSRA Forum › General › General Discussion › Ballistic Coefficient of hoch/darr 200 3 groove

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Ballistic Coefficient of hoch/darr 200 3 groove (Read 1875 times)

Van Senior Forum Member Offline Posts: 251 Location: Uath Joined: Oct 25^th, 2005	Ballistic Coefficient of hoch/darr 200 3 groove Dec 25^th, 2008 at 2:53am	Print Post
	Anyone know the "Ballistic Coefficient of hoch/darr 200 3 groove" .320 dia. bullet? Or the Saeco 200 grain flat nose in .320? The Saeco really shoots well but I'm worried that the wind is going to eat my cake over the darr bullet, what do you think? You sure can see the Saeco bullet holes better a 200 yards...... van


	IP Logged

ole7groove Ex Member	Re: Ballistic Coefficient of hoch/darr 200 3 groov Reply #1 - Dec 25^th, 2008 at 10:26am	Print Post
	Van- The BC of the 200 grain 3 groove 5r ogive B&D bullet is 0.324 (time of flight 444831 microseconds at 75 degrees F) measured over 200 yards with average muzzle velocity of 1481fs. An Oehler Model 43 Ballistics Lab was used with both muzzle and 200 yard chrongraph screens. While I do not have any actual ballistic data on the Saeco flat nose bullet, tests with a 200 grain B&D flat nose bullet of 200 grains yeilded a BC of .302 at 1475 fs. Regards, 7~


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5260 seconds.