ASSRA Forum › General › General Discussion › Clymer Reamer site.
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Clymer Reamer site. (Read 2942 times)
trev
Full Member
***
Offline



Posts: 157
Joined: Feb 25th, 2007
Clymer Reamer site.
Jul 22nd, 2008 at 8:27am
Print Post  
Pretty sure it was here.

Someone had posted the site address for the Clymer reamer design page, the one with all the angles and distances on it, tha is currently showing as "Under Construction" if you try to access it from their website.

I'd appreciate it if someone could post it again.

Got into a discussion with a friend over different chamber reamers, and leade angles.

I've been plugging away at the search function, but not finding what I am looking for.

Thanks!

Cheers
  Trev
  
Back to top
 
IP Logged
 
Quarter_Bore
Oldtimer
*****
Offline



Posts: 817
Location:   
Joined: Dec 16th, 2005
Re: Clymer Reamer site.
Reply #1 - Jul 22nd, 2008 at 8:35am
Print Post  
Try this link and see if it is what you are looking for.
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
trev
Full Member
***
Offline



Posts: 157
Joined: Feb 25th, 2007
Re: Clymer Reamer site.
Reply #2 - Jul 22nd, 2008 at 9:35pm
Print Post  
Nope!

That's the link to Clymers web page, that links to their "under construction" reamer design page. 
I got there, and that's why I am looking for a link.

Someone had posted a direct link to their design pages, which were still up, but you cannot access them if you don't have a direct link in.
 
Thanks!

Cheers
  Trev
  
Back to top
 
IP Logged
 
Bruce_S
Participating Member
*
Offline



Posts: 23
Location: MI
Joined: Jun 15th, 2008
Re: Clymer Reamer site.
Reply #3 - Jul 23rd, 2008 at 7:37pm
Print Post  
I looked and can't find the open link to Clymers Design..........I think it was for handguns, but you could get to the rifle design thru it.............

It is out there.................somewhere! and still open.

No-BS

Update!
(You need to Login or Register to view media files and links)

I think this was the old one........too bad it doesn't work!
« Last Edit: Jul 23rd, 2008 at 8:01pm by Bruce_S »  
Back to top
WWW  
IP Logged
 
Brozbows
Junior Member
**
Offline



Posts: 84
Location: Manitoba
Joined: Jun 6th, 2006
Re: Clymer Reamer site.
Reply #4 - Jul 23rd, 2008 at 10:36pm
Print Post  
Their Reamer Design page has been "Under Construction" for months and months now. I've been waiting and waiting for it to get back up too!
  
Back to top
 
IP Logged
 
trev
Full Member
***
Offline



Posts: 157
Joined: Feb 25th, 2007
Re: Clymer Reamer site.
Reply #5 - Jul 25th, 2008 at 8:33am
Print Post  
Hmmmm.

Starting to wonder if it was posted here...

Yeah. They have been under construction for about ever.

I'll dig around at my various places, and see if I can find it. If I do, I'll post it here too.

Cheers
   Trev
  
Back to top
 
IP Logged
 
trev
Full Member
***
Offline



Posts: 157
Joined: Feb 25th, 2007
Re: Clymer Reamer site.
Reply #6 - Jul 25th, 2008 at 11:36pm
Print Post  
Well, found the link, but it was dead too. 
 
Was on the homegunsmith site in a thread on reamer design. There is a pdf file there off of a Finnish police site that has a large number of more modern Euro and American cartridges, but it's in metric only (if that matters) and has rather few cartridges listed in the scheme of things.
I fired an email off in the general direction of the folks at Clymer, asking if it was ever going to be put back up. We'll see if they have any idea.

Apparently they are pretty good about sending out the info by email, but it's not quite the same as being able to "browse" cartridges and compare sizes.

Cheers
  Trev
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6582 seconds.