Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Uberti lowall 22 Hornet any good? (Read 3211 times)
henpeckedmuch
Ex Member


Uberti lowall 22 Hornet any good?
Jan 11th, 2008 at 10:05pm
Print Post  
I've been wanting a small caliber Hi or lowall and seen the Uberti. I was wondering if anyone has any experience with it. Is it accurate?
  
Back to top
 
IP Logged
 
Ken41
Participating Member
*
Offline



Posts: 15
Location: Greene County, SW PA
Joined: Nov 14th, 2007
Re: Uberti lowall 22 Hornet any good?
Reply #1 - Jan 13th, 2008 at 11:33am
Print Post  
I have a Uberti Low Wall in 30WCF. Still breaking in the barrel. It is shooting right around 1"+ groups with Winchester 150gr Power-Points, using a tang rear sight. The scope in the picture is not installed yet. The trigger needs a little work. They do come with a set trigger, but I don't know if any are yet available. The hammer goes to half cock on closing the action, don't know if there might be a way to get it to fuul cock. I have not taken the action apart yet. If you have any questions, let me know.

Ken
NRA Life
SW PA
« Last Edit: Jan 13th, 2008 at 11:43am by Ken41 »  
Back to top
 
IP Logged
 
mes
Senior Forum Member
****
Offline



Posts: 491
Location: Van Dyne, Wisconsin
Joined: Apr 17th, 2004
Re: Uberti lowall 22 Hornet any good?
Reply #2 - Jan 13th, 2008 at 1:25pm
Print Post  
How is the trigger pull on the rifle.  Any slop or travel and weight of pull?
Thanks.
  

Martin Stenback
Back to top
 
IP Logged
 
Ken41
Participating Member
*
Offline



Posts: 15
Location: Greene County, SW PA
Joined: Nov 14th, 2007
Re: Uberti lowall 22 Hornet any good?
Reply #3 - Jan 13th, 2008 at 5:33pm
Print Post  
Mes,
It creeps and is notchy, but the pull is around 4 lbs. There is also some side play in the trigger. I'll add some shims to remove that, and the creep and notchy feel should clean up with a stone. When I disassemble 
it I'll take pictures and post them.

Ken
NRA Life
SW PA
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint